A plastic pill splitter with a stainless steel fine blade used to split a pill in half. It features a push down lid and a small pill storage container. Available in one size and colour.
General Details
Caution
Always check with a pharmacist before storing medications in a dispenser or storage container as some medications require special storage conditions and some medications cannot be kept in the same container as others.
The blade is very sharp, take care not to come into direct contact.
Extra product information
A green coloured opaque, portable pill splitter that allows the user to see the pill inside the container for more accurate splitting. It also features finger grip positions at the lid to aid the user to open the splitter with greater ease. The pill splitter snaps closed for cutting pills and device storage. A small pill compartment is available for pill storage if necessary.
Method of Use
1. Lift up the cover.
2. Place the pill in the V shape holder.
3. Close the cover to split pill.
4. Lift the cover and remove the pill halves.
5. Close the cover and store in a closed position.
Cleaning Requirements
Before Use:
Rinse with hot water and allow to air dry.
After each use:
1. Brush residue off with a thick cloth taking care not to come into contact
with the blade.
2. Rinse with hot water and allow to air dry.
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Models / Specifications
Model Standard: One Model Only
- Weight 100 g
- Width Overall 40 mm
- Height Overall 25 mm
- Depth Overall 90 mm
Suppliers (1)
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
All Suppliers
Hermit Park Shopping Centre Pharmacy (Hermit Park)
Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
---|---|---|---|---|
0.0 - 0.0 () | unknown | unknown |
QLD Suppliers
Hermit Park Shopping Centre Pharmacy (Hermit Park)
Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
---|---|---|---|---|
0.0 - 0.0 () | unknown | unknown |
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.