Levitator Range of Residential Lifts (PR10677)
Levitator Range of Residential Lifts
https://ilcaustralia.org.au/products/10677
A range of residential lifts designed to carry single or multiple people up to 6 persons. Able to be fitted internally or externally and as part of a new or existing build. Some customisation is possible.
General Details
- Safety and Usage Advice
Remains fully operational with a 24 V system even in power failures.
24 hour monitoring and service.
Stops only at landings.
Will not move if something is sitting or standing on the top of the lift.- Extra product information
When the lift is on the bottom level, the top of the lift forms part of the floor on the upper level. When the lift is on the upper level, the bottom of the lift forms part of the ceiling of the lower level.
Door: Bifold; made of glass; can minimise feeling of being enclosed in a confined space.
Casing: 2 glass sides and a glass door. The remaining side (against the wall) is metal.
Configurations:A choice of configurations is available to suit different situations. The door is usually opposite to the side that is against the wall. In some circumstances the door can be built on one or both of the sides that are adjacent to the wall.
Colours: Range of finishes to match decor.- Manufacturer/Country
- Contact Supplier for Details
- Websites
- - http://www.levitator.com.au/
Models / Specifications
- Model Summit: A compact lift with glass case. No shaft is needed. It is wall mounted and goes up through the ceiling.
-
- Depth Internal 1200 mm
- Width 800 mm
- Load Capacity (supplier stated) 140 kg
- Length 800 mm
- Model Zenith: A lift with a self supporting tower that is fitted inside or against the side of the house. It can support up to 6 people.
-
- Width Internal 1050 mm
- Model Pinnacle: A smaller lift which can be installed inside or against the outside wall of a new or existing home. Carries three people or a person in a wheelchair in comfort.
-
Suppliers (0)
Agents (0)
Importers (0)
Manufacturers (0)
Images
Levitator Pinnacle Lift
Levitator Zenith Lift
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.