General Details

Extra product information

SEAT: Available in either a BEV seat or Recaro specialist seat. BOth seats are thickly padded, contoured "euro" style seats. There are many additional seat support options including lumbar support, lateral support and seat cushions with tempur foam.

HEADRESTS: a headrest is included as standard with both seating styles. There are various styles of headrest available including Comfort headrest (angle adjustable), kids headrest, Christian headrest (side supports at neck level) and a neck roll.

ARMRESTS: flip up armrests are standard with both seating styles.

LEGRESTS: Options include angle adjustable legrest, child legrest or foot rack.

WHEELS: Carony 12: Front wheels 200mm x 50 mm; Rear wheels 312mm x 56mm.
Carony 24: Front wheels 175mm x 27mm; Rear wheels 600mm diameter.
The self propelling wheels have a quick release mechanism for boot stowage.

FRAME: steel alloy frame available in corn yellow, patina green or ultra marine.

OPERATION: 1. Turn the swivel transport out of the car, ready to receive the seat.
2. Remove the push handles and footrest from the Carony wheelchair base. Dock the seat into the swivel transport.
3. Release the safety stop on the Carony wheelchair frame and push the chair into the car. Unload the wheelchair frame from the swivel and the seat.
4. Turn the seat into position in the car. Fasten the seat belt.
5. Store the wheelchair frame in the boot. Ensure it is well anchored.

ADJUSTMENT: The wheelchair frame is vertically adjustable to conform to different car models and ground conditions when you transfer into the car.
For the self-propelled model, the position of the wheels is adjustable to meet the user`s needs.

AREAS FOR USE: Can be used in the front and rear passenger seat positions.

Installation

Carony rails must be mounted inside the vehicle to use the Carony seat. The rails can be mounted in the front or rear passenger seats. Installation must be completed by an authorised agent.

Options

foot support/heel belt
calf/leg support
anti tip device
level raising kit (for raising the level of the Carony rails on the wheel unit)
puncture free wheels
transport fittings
Docking device
stabilisation belts (2, 4 or 6 point)
foldable backrest adaption kit

Licensing and Insurance Requirements

You are legally required to advise your State licensing authority of any medical condition or disability that may impact on your driving. If not, you risk fines or legal action and your car insurance can be affected. You may need to provide medical reports or undergo driving tests. Modifications to your vehicle must be in line with the Australian safety and design rules. Fitting of wheelchair occupant restraints, child restraints and vehicle hoist ramps must meet relevant Australian Standards. Modifications should be done by suitably qualified vehicle modifiers. You will also need to inform your car insurer of any vehicle modifications. Your policy may become void if you do not do so. Contact the vehicle licensing / registration authority in your State for more information.

Manufacturer/Country

Sweden

Maintenance

Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

Models / Specifications