Patient Care Products Transporter Commode (PR11616)
Patient Care Products Transporter Commode
https://ilcaustralia.org.au/products/11616
Mobile commode/shower chair with padded armrests, seat and backrest, designed for both domestic and health care facility. The stainless steel frame is treated to help protect against rust. A folding footrest can lift up to assist transfers. A round pan carrier is under the seat. It can be used over the toilet, in the shower or as a commode. Both front and rear castors are lockable.
General Details
- Extra product information
Frame
Stainless steel tubing.Frame finish
Polished.Toilet seat
Padded.Commode
A round pan carrier is under the seat.Armrests
Padded.
Drop down.Backrest
Padded.Footrest
Folding footrest.Castors
Locking.- Factors to Consider
Health facility model has 50mm more clearance height.
The footrest bar may lift up on a hinge to enable foot placement for transfers.
The footrest bar may provide discomfort and little support, particularly when wearing nothing on the feet.
Drop down armrests could assist transfers, or access to assist bathing.
The occupant may need support while using drop down armrests if their sitting balance is poor.- Options
Transporter Commode (PCP 10568)
22mm stainless tubular steel frame.
Drop down full length armrests.
Padded toilet seat.
Castors 125mm.- Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
- Manufacturer/Country
- Contact Supplier for Details
Models / Specifications
- Model Transporter Commode 10568 (Domestic): Transporter Commode 10568 (Domestic)
-
- Diameter of Castor 125 mm
- Depth of Seat 400 mm
- Height 940 mm
- Height of Armrest from Ground 730 mm
- Height of Seat Front 520 mm
- Weight 8 kg
- Load Capacity (supplier stated) 110 kg
- Width 590 mm
- Clearance Under Seat 450 mm
- Width between Armrests 500 mm
- Width of Seat 400 mm
- Depth 840 mm
- Model Transporter Commode 10568 (Institutional): Transporter Commode 10568 (Institutional)
-
- Height of Seat Front 570 mm
- Width 590 mm
- Height 940 mm
- Weight 8 kg
- Width between Armrests 500 mm
- Depth of Seat 400 mm
- Depth 840 mm
- Diameter of Castor 125 mm
- Width of Seat 400 mm
- Clearance Under Seat 500 mm
- Load Capacity (supplier stated) 110 kg
- Height of Armrest from Ground 730 mm
Suppliers (0)
Agents (0)
Importers (0)
Manufacturers (0)
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.