A range of switches that can be activated by sipping or blowing on a straw. Some models allow extra activations for long sips or long puffs. The straw attaches to a small box containing the switch mechanism. One or more switch cables with 3.5mm connectors are used to interface with the device to be controlled. Optional bed, neck and head mounts are available.
General Details
Extra product information
Sip and Puff Switch
A simple Sip and Puff switch that uses either sip or puff for switch closure and activation.
Sip and Puff Switch (double closure)
Sipping on the switch results in one switch closure and puffing on the same tube will result in a second switch closure.
The tube is mounted into a 330mm gooseneck with a 3-way mounting clamp.
Double Sip Switch (double closure)
A small sip will result in switch activation, further sipping will continue the first activation and provide a second activation.
The tube of this switch is mounted into a gooseneck with a 3-way clamp.
Double Puff Switch (double closure)
Similar to the Double Sip Switch, except the double switch closure is activated by puffing on the tube.
Double Puff and Double Switch
4 switch closures are provided by this switch.
Sub-Micronic Filter
A Sub-Micronic Filter traps mucous and saliva reducing the risk of infection. (Available from Technical Solutions)
Factors to Consider
Some breath support is required to use switches activated using sip/puff functions.
Suitable for a user with limited physical function, but has adequate sip/ puff skills.
Switch tubes need to be cleared of saliva.
Tube length can influence the force required for switch activation.
User fatigue can reduce effective use. Sensitivity adjustments may assist in reducing demands on the user.
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Manufacturer/Country
Contact Supplier for Details
Warranty
Contact Supplier for Details
Websites
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Models / Specifications
Model KA970 : Sip and Puff Switch, 2 outputs, with gooseneck mount
Model SIP-PUFF-2 : Sip and Puff Switch - 2 outputs
Suppliers (1)
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
All Suppliers
Technical Solutions Australia Pty Ltd (Silvan)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
VIC Suppliers
Technical Solutions Australia Pty Ltd (Silvan)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.