A mobile single section table which is electrically adjustable to any position between horizontal and 85 degrees. Side rails provide support for an optional tray table and adjustable restraining straps. The users legs can be restrained individually through a central cut out. Fixed angle removable footrest. The dual action model is height adjustable from 50 -90 cm.
General Details
Extra product information
Materials of frame: Steel metal tubing, grey base.
Finish: Powder coated
Materials of supports: Fire resistant "cordova" vinyl, covering a 40mm high density foam mounted on 20mm plywood.
Method of adjustment: The electrical actuators are operated by a hand switch. Actuators are moisture proof and quiet in operation. Angle indicator fitted.
Securing options: Set of three adjustable straps.
Castors: 110mm braked castors giving 130mm clearance below the frame.
Options
2-section upholstery for prone standing or backrest
Fixed or variable angle work surface
Height adjustable footrest
Torso wedges
Pommel
Width increase to 70cm
Tilt table strap set (3 strap includes 1 split strap)
Additional battery
Additional faster lift
Additional foot or hand control
Manufacturer/Country
Australia
Websites
- Dejay Medical - https://dejay.com.au/product-category/therapy-aids
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Models / Specifications
Model Dejay Single Action Tilt Table: Tilt table
- Load Capacity (supplier stated) 200 kg
- Diameter of Castor 100 mm
Model Dejay Dual Action Tilt Table: High low tilt table
- Load Capacity (supplier stated) 200 kg
- Diameter of Castor 110 mm
- Angle of Tilt 85 degrees
Suppliers (1)
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
All Suppliers
Dejay Medical and Scientific (Aspley, Hallam, Seven Hills)
Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
---|---|---|---|---|
0.0 - 0.0 | unknown | unknown |
NSW Suppliers
Dejay Medical and Scientific (Seven Hills)
Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
---|---|---|---|---|
0.0 - 0.0 | unknown | unknown |
VIC Suppliers
Dejay Medical and Scientific (Hallam)
Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
---|---|---|---|---|
0.0 - 0.0 | unknown | unknown |
QLD Suppliers
Dejay Medical and Scientific (Aspley)
Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
---|---|---|---|---|
0.0 - 0.0 | unknown | unknown |
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.