This product package is designed to stop the gas flow to a stove after a specified time has expired. The kit consists of a gas valve and a timer switch. Suitable for people who are unable to reliably turn the gas off
General Details
Extra product information
When the switch is pressed to operate, the device allows gas to flow through is valve to stove.
The pre-set timer allows gas flow for a set period of time and once the pre-set time has expired, the gas valve is closed and the supply to the stove cut off.
The timer comes with a pre-set 10 minute use period as standard, but an electrician can modify the timer to any specified time range between10 to 239 minutes.
Installation
Product requires professional installation by electrician and plumber/gas fitter.
Manufacturer/Country
Queensland
Warranty
Contact Supplier for Details
Websites
- System Control Engineering - Stove Timer Switch - http://www.systemcontrol.com.au/product/industrial-gas/time-switches/stove-timer-switch
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Models / Specifications
Model L0012: Gas Stove Timer Switch
Suppliers (1)
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
All Suppliers
System Control Engineering (SCE) (Belmont , Blackburn, Hendon, Loganholme, Seven Hills)
Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
---|---|---|---|---|
0.0 - 0.0 () | unknown | unknown |
VIC Suppliers
System Control Engineering (SCE) (Blackburn)
Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
---|---|---|---|---|
0.0 - 0.0 () | unknown | unknown |
NSW Suppliers
System Control Engineering (SCE) (Seven Hills)
Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
---|---|---|---|---|
0.0 - 0.0 () | unknown | unknown |
QLD Suppliers
System Control Engineering (SCE) (Loganholme)
Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
---|---|---|---|---|
0.0 - 0.0 () | unknown | unknown |
WA Suppliers
System Control Engineering (SCE) (Belmont )
Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
---|---|---|---|---|
0.0 - 0.0 () | unknown | unknown |
SA Suppliers
System Control Engineering (SCE) (Hendon)
Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
---|---|---|---|---|
0.0 - 0.0 () | unknown | unknown |
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.