General Details

Caution

All pressure reduction products must be monitored to prevent 'bottoming out'. This occurs when the user's weight bears down so hard on the product material that it is flattened and the bony parts are pressed against the surface below the cushion or mattress. Where bottoming out occurs even with correct use, a different product may need to be considered.

Extra product information

SEAT: Seating consists of pressure relieving memory PVC straps in the seat and back and zippered padded upholstery. Each strap conforms individually to the user`s body shape, suspending the weight across multiple points. The strapping system also reduces heat and moisture build up.

A range of foam postural supports and padding are available. Fully adjustable via hook and loop tape or adjustable buckles.

The chairs use a directional wheel system which facilitates manoeuvring the chair laterally and around corners and has a choice of alternate wheels. Wheels can be individually locked via a foot operated system located above the rear castors and on the front castors.

FEATURES: The frame is stainless steel. The armrests are height adjustable, swing away and removable. A range of footplates and legrests are available, including height and angle adjustable, one or two-piece, flip up and removable.

Features 180 degrees of backrest recline and/or 45 degrees of tilt in space. The hydraulic gas lifts for the backrest recline and tilt in space are adjusted via a lever located on the back of the chair.

Options

. Front or rear mounted self-propelling mag wheelchair wheels
. Range of trays
. Headrest
. Neck rest
. Lateral shoulder supports
. Wing covers
. Lateral supports bolsters
. Wedge bolster
. Round bolster
. 1" side reduction pad
. Upper side pads
. Lower side pads
. Fleece pads [backrest, seat, armrest]
. Covers for fleece pads
. IV pole and holder
. Padded/unpadded seat belt
. Padded thigh belt
. Range of fixed footrests
. Footrest pads
. Range of footplates

Cleaning Requirements

This chair may be sponged to clean.

Crash Test Information for Wheeled mobility devices

This wheeled mobility device meets the design requirements and has been successfully crash tested in accordance with ANZS/ISO 7176-19:2008 MOD. This standard relates to the design requirements specified for a wheeled mobility device to be used to transport an individual in a motor vehicle.

Manufacturer/Country

Broda Seating, Canada.

Warranty

3 years on frame

Websites

• Broda 785 Tilt Recliner - http://www.seatingisbelieving.com/chair/18
• Broda - http://www.seatingisbelieving.com/

Maintenance

Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

Models / Specifications