Harvest Healthcare Royal Bariatric Mattress (PR12691)
PR12691 Harvest Healthcare Royal Bariatric Mattress
https://ilcaustralia.org.au/products/12691
An extra wide, electrically operated, alternating air replacement mattress designed for larger users. The mattress consists of two layers of cells. The top layer of cells alternates to provide pressure relief. The mattress has a vapour permeable cover.
General Details
- Caution
All pressure reduction products must be monitored to prevent 'bottoming out'. This occurs when the user's weight bears down so hard on the product material that it is flattened and the bony parts are pressed against the surface below the cushion or mattress. Where bottoming out occurs even with correct use (eg correct inflation levels), a different product may need to be considered.
- Extra product information
STRUCTURE: Two layers of reinforced, horizontal air cells. Top layer alternates and bottom layer does not alternate. The top three cells are static for head support.
CONTROLS: Push button controls for level of pressure and cycle time are situated on the pump.
BATTERIES: The mattress system features a battery backup which can sustain the mattress functions for up to three hours.
FEATURES: A transport mode allows air to be trapped within mattress to allow transportation.
An audible alarm indicates when the mattress is operating on battery power.
COVER: Vapour permeable, water resistant polyurethane impregnated material.
OPERATION: The mattress has three operation modes:
1) Alternating - the top layer of cells alternate in a 1:2 ratio. Cycle time can be adjusted between five minutes and 30 minutes.
2) Static - allows a continuous pressure level
3)Patient Care - inflates all cells to maximum levels to facilitate patient care.SAFETY: An audible alarm indicates when the mattress is operating on battery. CPR relase valve allows rapid release of air.
Models / Specifications
- Model base: base
-
- Model Royal Bariatric AltAirMattress: Royal Bariatric AltAirMattress
-
- Length 1980 mm
- Width 1070 mm
- Depth 203 mm
- Load Capacity (supplier stated) 190 kg - 350 kg
Suppliers (0)
Agents (0)
Importers (0)
Manufacturers (0)
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.