General Details

Caution

Queensland transport requires that modifications comply with the Australian Design Rules and the QT Code of Practice and that devices are installed to manufacturers instructions. Modifications must be performed by an authorised modifier. Major modifications must be approved by the Queensland transport vehicle safety and operations section or the approved person scheme. Once approved, a certificate of modification will be provided and issued with a modification plate. For further information regarding installation and approval requirements contact your local Queensland Transport customer service centre.

Extra product information

CONTROLS: Controls are located on a hand held pendant which is stowed on the inside of the vehicle.

OPERATION: The lifters are powered by the vehicle`s battery. As an option, the lifters can be powered by a power pack which is plugged into the vehicle power outlet.
The lifter automatically raises and lowers the wheelchair. The user must manually tilt and guide the wheelchair into and out of the trunk.

AREAS FOR USE: These lifters are suitable for manual folding wheelchairs weighing up to 25kg. The boot mounted lifter is suitable for most types of vehicles including sedans, station wagons and hatchbacks. The rear and side door mounted models are suitable only for minivans and vans.

Method of Use

1. Position the vehicle at the rear of side of the car (depending on the model used). Remove the seat and hook the lift claw to the T bar docking device.
2. Push the UP button on the pendant. The lifter will tilt the wheelchair into the horizontal position with the user`s guidance.
3. Continue to push the UP button until the wheelchair is above the trunk opening.
4. Swing the wheelchair above the trunk opening and towards the cavity.
5. push the DOWN button to lower the wheelchair into the trunk and remove the lift claw from the docking device. The lift and wheelchair should both fit in the trunk.

Licensing and Insurance Requirements

You are legally required to advise your State licensing authority of any medical condition or disability that may impact on your driving. If not, you risk fines or legal action and your car insurance can be affected. You may need to provide medical reports or undergo driving tests. Modifications to your vehicle must be in line with the Australian safety and design rules. Fitting of wheelchair occupant restraints, child restraints and vehicle hoist ramps must meet relevant Australian Standards. Modifications should be done by suitably qualified vehicle modifiers. You will also need to inform your car insurer of any vehicle modifications. Your policy may become void if you do not do so. Contact the vehicle licensing / registration authority in your State for more information.

Maintenance

Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

Models / Specifications