The Magic Wand-Pad Switch suits a wide range of applications where a user can touch the switch with bare skin (usually the hand, arm or face). Touch of the skin on the wand activates the switch with the switch resetting from as little as 2mm away from the activation surface. No pressure is required. The switch can be used free standing or fitted to many mounting systems.
General Details
Extra product information
METHOD OF ACTIVATION:
The Magic Wand Switch can be used with the special "No Touch" Wand (included). Optionally there is a headset with a metal activation point at the end of an adjustable arm to use chin, mouth, tongue as switch sites.
SWITCH JACK CONNECTION:
3.5mm
FEEDBACK:
An audible 'beep' feedback can be turned on or off as required.
POWER REQUIRED:
It runs for months (depending on frequency of use) on 2 x AA batteries (included).
Manufacturer/Country
Techical Solutions/Australia
Warranty
12 months
Websites
- Magic Wand Switch - http://www.tecsol.com.au/SwitchWand.htm
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Models / Specifications
Model Magic Wand Headset Sensor: Magic Wand Headset Sensor
- Activation Pressure 0 g (skin contact only required)
Model Magic Wand Switch: Magic Wand Switch
- Depth 22 mm
- Length 100 mm
- Width 67 mm
- Diameter of Button, Dial or Key 4 mm (diameter of wand )
- Weight Overall 155 mg (with batteries installed)
- Activation Pressure 0 g (skin contact only required)
Features
Contact listed suppliers to confirm features, options and models available.
Accessories
-
Access method:
- Direct selection
Power Source
-
Power source:
- two batteries
Optional Accessories
Standard Features Included
-
Operational feedback:
- Auditory beep
- Visual (LED)
-
Switch Modes:
- Direct
-
Switch Material :
- metal
- plastic
-
Switch Type:
- Sensor
- Single
- Wand
Set Up or Installation
-
Plug Type:
- 3.5mm / 1/8 Mono
Suppliers (1)
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
All Suppliers
Technical Solutions Australia Pty Ltd (Silvan)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
VIC Suppliers
Technical Solutions Australia Pty Ltd (Silvan)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.