1300 885 886 Independent Living Centres Advisory Service

Global Range of Office Chairs (PR13484)

9226 pr13484%20global%20g18%20office%20chair

Global G18 office chair

https://ilcaustralia.org.au/products/13484

Ergonomic task chair with lumbar support, seat tilt, seat height adjustment, backrest angle and height adjustment using four separate levers on a five star castor base. Options include two backrest heights and seat sizes, seat slide, drafting kit, glides and adjustable armrests.

General Details

Extra product information

Method of Adjustment
Seat height control
Pull lever up while seated and height is decreased.
Pull lever up while unseated and height increases
Back angle control (backrest angle)
Pull lever up and back angle tilts with body motion.
Push down on lever and back angle is locked in position.
Backrest height control
Turn lever at base of backrest counterclockwise to lift or lower backrest to desired height. Turn clockwise to secure.
Armrest height control
Turn knob to adjust armrest up or down. Knob locks into position automatically.

Models in range
Global G16
Height adjustable.
Back rest height and angle adjustable.

Global G18 Series 11
Height adjustable.
Back rest height and angle adjustable.
5 way free float mechanism with forward tilt.
'Zed' style adjustable arm rests.

Global G18 Series 1
Height adjustable.
Back rest height and angle adjustable.
4 way gas lift.
Polyurethane adjustable arm rests.

Maintenance

Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

Manufacturer/Country
Global/Canada

Models / Specifications

Model G16 : standard model
  • Width of Seat 480 mm
  • Depth of Seat 460 mm
  • Height of Backrest 420 mm
Model G18: large seat and backrest
  • Height of Backrest 560 mm
  • Depth of Seat 480 mm
  • Width of Seat 510 mm

Suppliers (0)

    Agents (0)

      Importers (0)

        Manufacturers (0)

          Maintenance

          Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

          Standards

          Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation

          Disclaimer

          Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.