The small PIR Movement Sensor with built in radio transmitter can be mounted on the wall of the room to be monitored or placed on the floor under the bed. When the sensor detects human movement in front of the sensor window, a signal is sent to the Wireless Alarm System Receiver/Buzzer. Positioning the PIR sensor under the bed will allow the monitored person to move about in bed without causing an alarm. However, as soon as the occupant hangs their feet over the side of the bed they will be visible to the sensor window and the alarm will be triggered. A wall mounted PIR sensor will have a view over a large area; any movement in the area in front of the sensor window will trigger the alarm. This may be useful for monitoring the space outside the bedroom door – the alarm will be triggered when the client leaves the room. The PIR sensor communicates with a wireless alarm system receiver/buzzer unit which is purchased separately or available as a kit.
General Details
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Manufacturer/Country
Technical Solutions / Australia
Warranty
Contact Supplier for Details
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Models / Specifications
Model RLAB-P: One model only
Suppliers (1)
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
All Suppliers
Technical Solutions Australia Pty Ltd (Silvan)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 88.0 - 0.0 | unknown | unknown |
VIC Suppliers
Technical Solutions Australia Pty Ltd (Silvan)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 88.0 - 0.0 | unknown | unknown |
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.