ShowerBuddy SB1 Shower Chair System (PR13933)

https://ilcaustralia.org.au/products/13933

A powder coated aluminium and stainless steel mobile shower chair designed attach to and roll along a frame to access a shower that has a threshold. One end of the frame tracking sits inside the shower, while the other, with a mobile base, sits outside the shower. The user sits on the chair which rolls along the track into the shower. The chair rotates 360 degrees. The two parts of the frame can then be separated and the shower door closed. Can also be used over a toilet. The unit dismantles and is transportable. Also available for bathtubs.

General Details

Maintenance

Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

Factors to Consider

May assist an immobile user to access a shower that has a threshold / hob.
The chair rotates 360 degrees for positioning in the shower.
The shower bracket and bridge assembly are height adjustable to allow use in a range of shower situations.
Same unit can also be used over the toilet.

Method of Use

When using over the toilet
Assemble the toilet bracket around the base of the toilet to be used (all parts just snap together).
Reverse the mobile commode up to the bracket and snap-lock into place.
Slide the chair section of the commode over the toilet pan.

When using in the shower
Assemble the shower bracket and place in the shower.
Assemble the docking / bridge assembly and connect it to the shower bracket so that it extends out over the shower hob. Both the shower bracket and the bridge assembly are height adjustable.
Reverse the mobile commode up to the bridge assembly and lock into place.
Slide the chair section of the commode over the bridge and onto the shower bracket, lock into place. The seat section of the chair can now be rotated 360 degrees if required.
Remove the mobile commode base and the bridge assembly so that the shower door can be closed if required.
Reinstate the bridge assembly and the mobile commode base to exit the shower.

Extra product information

Components
Commode chair.
Mobile base.
Docking base / bridge assembly.
Shower bracket.
Toilet bracket.

Frame
Powder coated aluminium and stainless steel.
Shower bracket and bridge assembly frames are height adjustable.
Corrosion, mould resistant.
Tool-less assembly, parts snap-lock together.
Shower bracket is supported by rubber ferrules outside the shower and by four suction ferrules on the shower base.
Toilet bracket is three piece and fits around the front of the toilet.

Upholstery
Closed cell foam padded seat, armrests and headrest.
Slung style polyurethane fabric backrest.

Seat
Rotates through 360 degrees and can be locked in the 90 degree positions.
Foam padded.
Open front commode aperture.
Padded aperture cushion available.
Detachable.

Backrest
Slung style upholstery.
Integrated push handle.

Headrest
C-shaped.
Foam padded.
Adjustable for height and forward / backward position.

Armrests
Detachable, foldaway armrests.

Footrest
flip up footrest with rubber non slip grips.

Castors
4 x 130mm (5") locking castors.

Features
Chair can be locked in position at either end of the track.
Rolls over standard / elongated toilets.
Lap / chest belts.
Commode pan.

Maximum toilet height clearance is 535mm

Commode seat hole is 175mm (W) x 335mm (L)

Manufacturer/Country

Showerbuddy/New Zealand

Websites

- http://showerchairs.co/

Models / Specifications

Model Shower Buddy: One model only

• Length of Rail 1585 mm
• Length Overall 810 mm
• Width Overall 570 mm
• Height of Armrest 790 mm
• Height Overall 1095 mm - 1160 mm
• Depth of Seat 420 mm
• Load Capacity (supplier stated) 160 kg
• Width of Seat 450 mm
• Width of Backrest 460 mm
• Height of Backrest 440 mm
• Height of Seat from Ground 550 mm (maximum seat height is 615mm )
• Width between Armrests 475 mm

Suppliers (0)

Agents (0)

Importers (0)

Manufacturers (0)