The LIGHTWRITER wheelchair mount consists of a quick-release LightWRITER SL40/50 mount plate, a tube connector, a right-angled rod, and a wheelchair clamp. The wheelchair clamp can be attached to horizontal or vertical round or square tubing. Three models are avaiable.
General Details
Factors to Consider
Increasing the angle of the keyboard / interface may assist some users with vision impairments to view them more effectively
Increasing the angle of the keyboard / interface may assist some users with movement and co-ordination difficulties in accessing the device more effectively
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Extra product information
Physical Description
The Hinged Mount for LightWRITER is constructed using two acrylic sheets attached via an acrylic hinge at the front
An acrylic cylinder is used to adjust angle by moving it toward or away from the hinge
hook and loop tape is used to fix the angle, to attach the device to the top acrylic sheet and to fasten the mount to the flat surface it is being used from
Tools required for setting up and using
No tools are required to use or set up this mounting system
Manufacturer/Country
Toby Churchill/ United Kingdom
Warranty
Contact Supplier for Details
Websites
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Models / Specifications
Model WCM-QR40-MOUNTKIT-B: The Lightwriter Wheelchair Mount QR SL40 Kit with right angled rod, frame clamp, mount plate connector, hex keys and instructions. Mount plate not included
Model WCM-QR40-MOUNTKIT-B-MP: The Lightwriter Wheelchair Mount right angled rod, frame clamp, SL40 mount plate, mount plate connector, hex keys, instructions included.
Suppliers (1)
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
All Suppliers
Zyteq Pty Ltd (South Melbourne)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
VIC Suppliers
Zyteq Pty Ltd (South Melbourne)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.