1300 885 886 Independent Living Centres Advisory Service

Easy Tap Ceramic Disc Valve (PR14060)

6856 pr14060 easy%20tap%20ceramic%20disc%20valve

https://ilcaustralia.org.au/products/14060

The Easy Tap replaces the existing tap spindle and features two ceramic discs designed to reduce friction when turning taps. It also is designed to shut off water flow to prevent water leakage from the tap. It may be able to be used with existing tap handles if the fittings are compatible.

General Details

Extra product information

Features
The manufacturer states that there is no interval between the ceramic discs resulting in no wear to the tap body and therefore avoiding water leakage.
The manufacturer states that the ceramic discs do not rust or stiffen enabling the tap to be turned freely.
The Easy Tap valve consists of dezincification resistance brass.
Two O rings are installed in the valve (generally one O ring is standard) to provide additional prevention against water leakage.
The seat washer design uses silica gel, which has high impact strength as well as thermo stability. This provides the hot water taps with the same life span as cold water taps.

Maintenance

Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

Manufacturer/Country
Contact Supplier for Details
Websites
- http://www.easytap.com.au/

Models / Specifications

Model Easy Tap Ceramic Disc Valve: Features two ceramic discs designed to reduce friction when turning taps

Suppliers (1)

Agents (0)

    Importers (0)

      Manufacturers (0)

        Maintenance

        Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

        Standards

        Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation

        Disclaimer

        Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.