General Details
Extra product information
Features
The manufacturer states that there is no interval between the ceramic discs resulting in no wear to the tap body and therefore avoiding water leakage.
The manufacturer states that the ceramic discs do not rust or stiffen enabling the tap to be turned freely.
The Easy Tap valve consists of dezincification resistance brass.
Two O rings are installed in the valve (generally one O ring is standard) to provide additional prevention against water leakage.
The seat washer design uses silica gel, which has high impact strength as well as thermo stability. This provides the hot water taps with the same life span as cold water taps.
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Manufacturer/Country
Contact Supplier for Details
Warranty
Contact Supplier for Details
Websites
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Suppliers (2)
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
- All
- ACT
- NSW
- NT
- QLD
- SA
- TAS
- VIC
- WA
There are no suppliers of this product.
All Suppliers
| Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
| Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
WA Suppliers
| Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
| Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
ACT Suppliers
| Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
NSW Suppliers
| Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
NT Suppliers
| Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
QLD Suppliers
| Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
SA Suppliers
| Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
TAS Suppliers
| Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
VIC Suppliers
| Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.
