A wandering person alarm system that alerts a carer when someone is trying to go out of the door. Infrared detectors are mounted above the doorway and once movement is detected, a buzzer or a strobe light is activated. Other options are available. It is designed for healthcare facility use.
General Details
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Extra product information
Components
Control box which houses the receiver, call input and alert system circuit board needs to be connected to a mains power supply.
Power pack which connects the control box to the mains power supply.
A surface mount passive infra-red (PIR) detector mounted to a transmitter box.
Power
Control box needs to be connected to a 240V mains power outlet at all times.
Requires installation of a power point above the top of the door.
Power backup of up to 3 hours in case of a power failure.
Activation
Can be interfaced with an existing nurse call system.
Alarm can be set to trigger prior to the person crossing the door threshold.
When alarm is triggered an alert will be sent to the call screen or to a pager.
Factors to Consider
This system is an aid only and does not replace adequate supervision.
Ensure that any cords and leads are secured as trailing leads can create a trip hazard.
Installation
Do it yourself installation.
Mount the sensor supplied with double sided tape above the doorway.
The control box can be located where the carer is primarily situated or within the hearing and visual range of the carer.
Method of Use
Door sensor needs to be mounted at the top of the doorway.
Control box can be situated where carer is usually located or within hearing or visual range.
The alarm is activated once movement is detected close to the doorway.
To turn off the alarm, carer has to turn off the switch in the control box.
The control box needs to remain off for 10 secs before turning it on again to restore its settings.
Manufacturer/Country
Biovations / Australia
Warranty
Contact Supplier for Details
Websites
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Models / Specifications
Model 770: Biovations Door Alarm
Suppliers (1)
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
All Suppliers
Biovations Pty Ltd (Sandown Village)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
VIC Suppliers
Biovations Pty Ltd (Sandown Village)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.