CS Cavity Sliders Double Overtaking Units (PR14993)
CS Cavity Sliders Double Overtaking Units
https://ilcaustralia.org.au/products/14993
A double sliding door which is installed in a wall cavity. The Double Overtaking Unit is two doors, side by side, within the same wall cavity. This allows a walk through opening of approximately twice the width of the cavity unit when the doors are open. It suits any door style and 2 to 5 doors can slide in to one pocket.. Able to be fully customised to suit the individual application.
General Details
- Extra product information
Suit domestic or commercial appliactions. Suit left or right opening. Supplied fully assembled with or without the doors (individual can supply the doors). Can be installed into any wall with a minimum thickness of 144mm. Suit any door, hollow or solid core, no more than 40mm thick. Available as single or double (bi parting) units. No floor mounted door guides are required - all guides are concealed within the cavity and on the underside of the doors. Due to this, the doors must protrude from the cavity by a minimum of 60mm when fully open.
Two jambs available:
Wooden (Timberform): Pine or Meranti for architraves or grooved for gyprock.
Powder Coated Aluminium (Powderseal): powder coated aluminium and fitted with draught seals.Available as lockable or non lockable. Handles to be specified separately.
- Manufacturer/Country
- Contact Supplier for Details
- Websites
- - http://www.cavitysliders.com.au/downloads/cs%20group%20spec%20guide.pdf
Models / Specifications
- Model CS Cavity Slider Overtaking Units: A double sliding door which is installed in a wall cavity.
-
Suppliers (0)
Agents (0)
Importers (0)
Manufacturers (0)
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.