1300 885 886 Independent Living Centres Advisory Service

Ropox Kitchen Frame Systems (PR15398)

13583 pr15398%204single

4Single

https://ilcaustralia.org.au/products/15398

An adjustable height system for seated and standing users. The kitchen systems are wall mounted or free standing. They are adjustable either electrically or manually. Customised sizes are made to order. They can be fitted with bench tops and fittings.

General Details

Manufacturer/Country
Denmark
Websites
- http://www.ropox.com/uk/concepts/kitchen-concept.html

Models / Specifications

Model KitFrame Diagonal (overhead cupboards): A system for wall cupboards adjustable diagonally downward and forward. The diagonal travel is 430mm downward and 180mm forward. The frame is electrically adjustable.
Model KitFrame VertiElectric: An electrically adjustable frame for wall cupboards and units. The system raises and lowers wall units 300mm vertically, by pushing a control switch, normally located in fascia below the bench top. Lights can be fitted in the safety stop plate.
Model KitFrame Hot'n Cold: The KitFrame Hot'n Cold system is a wall mounted frame for kitchen hardware and wall cupboards. It allows manual or electrical height adjustment of oven, cupboard, fridge or dish washer.
Model KitFrame Flexi (bench tops): Manually height adjustable bench tops by means of a handle or electrically height adjustable by means of a control switch. The electrical height adjustment is by means of one or two low-noise motors. The KitFrame Flexi allows full leg room up to the wall.
Model 4Single: 4Single is a height adjustable frame suitable for worktops or tables. It is available with either manual or electric height adjustment. The height is adjustable via a handle for the manual model and an infrared hand control for the electric model.

Suppliers (0)

    Agents (0)

      Importers (0)

        Manufacturers (0)

          Images

          13584 pr15398%20kitframe%20flexi%20%28benchtops%29
          KitFrame Flexi (benchtops)
          13585 pr15398%20kitframe%20diagonal%20%28overhead%20cupboards%29
          KitFrame Diagonal (overhead cupboards)
          13586 pr15398%20kitframe%20vertielectric
          KitFrame VertiElectric
          13587 pr15398%20kitframe%20flexi%20%28benchtop%20at%20ilc%20wa%29
          KitFrame Flexi (benchtop at ILC WA)

          Maintenance

          Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

          Standards

          Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation

          Disclaimer

          Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.