BSP Electronic Dustbin (PR15653)
BSP Electronic Dustbin
https://ilcaustralia.org.au/products/15653
A rubbish bin which has an automatic lid which lifts up when activated by a sensor located on the front, top aspect of the bin. The lid closes automatically after a set period of time. Suitable for domestic or light commercial / healthcare facility kitchens or laundries.
General Details
- Extra product information
The bin and lid is constructed from grey plastic.
The bin uses an infrared sensor to detect an object approximately 100mm away from the inductive window (front control panel). When detected the cap lid opens automatically, then closes. The lid will open within approximately 0.5 seconds of the sensor being activated, then it will close approximately 3 seconds after the hand / object is drawn away.
Available in two capacities.Power source: requires 4 'D' size batteries. The bin lid needs to be removed and turned upside down to replace the batteries.
Drive system: The automatic lid is driven by the infrared detecting device, a mechanical transmitting device and an electric drive system. These are housed, with the batteries, in the rear compartment of the bin lid.
Control panel: Features two small push buttons for 'open' and 'close'. This allows the user to open the lid manually (the lid will stay open), then to close the lid manually. This enables the user to throw in rubbish frequently.
The indicator light on the control panel flashes yellow, once every three seconds, to indicate low battery.
The control panel also has the inductive window (sensor).
Replacing plastic bag: Follow these steps:
1. Remove lid.
2. Remove inner circle from pail.
3. Insert kitchen tidy bag and tuck it over the top of the pail.
4. Insert the inner circle to it's correct position.
5. Replace lid into the correct position.
Cleaning: The lid is wiped clean. It cannot be immersed in water.
Maintenance: Ensure the inductive window (sensor) is not exposed to direct sunlight.
The manufacturer states the batteries will last approximately 6 months with the lid being opened on average 20 times per day.- Manufacturer/Country
- China
Models / Specifications
- Model EB20 : 20 Litre
-
- Depth of Aperture 200 mm
- Capacity 20 l
- Width of Aperture 215 mm
- Height Overall 580 mm
- Depth Overall 330 mm
- Width Overall 250 mm
- Weight Overall 3010 g
- Model EB27 : 27 Litre
-
- Capacity 27 l
Suppliers (0)
Agents (0)
Importers (0)
Manufacturers (0)
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.