A moulded plastic, free standing, fresh water, flushing portable toilet which is self contained. It is available in three sizes.
General Details
Caution
Toilet paper does not break down, special paper is available from the same supplier.
Extra product information
The Bi-Pot consists of a standard size full toilet seat and lid which is mounted onto water storage and waste storage tanks. The tanks are connected by stainless steel side hooks and the waste storage tank is detachable for emptying. The manual piston pump is located to the rear of the toilet seat and generates water from three rinsing jets. The toilet, including the piston pump is able to be completely dismantled for cleaning. It is available in pearl white colour.
Method of Use
Flushing
Water can be added to the bowl, before use, using the piston pump. To flush after use, pull waste valve handle (located at the front of the unit) straight out, then use the pump again to rinse. Water and waste will pass into the waste storage tank. To close the seal of the waste storage tank, push the valve handle in all the way. This will ensure a seal when the waste storage tank is being carried.
Emptying and Preparation for use:
The transparent lids on the water and storage tanks enable the user to see when to empty the tank. The tanks can be disconnected from each other and carried separately, in an upright position, using the carry handle. Emptying is achieved by removing the large screw top lid on each tank and tipping out the contents.
Fresh water will need to be added to the fresh water storage tank.
Cleaning Requirements
A range of chemicals are available from the supplier which can be added to the fresh water storage tank to clean, deodorize and sanitise the toilet bowl.
Manufacturer/Country
Italy
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Models / Specifications
Model Bi-Pot 30: 11 Litres waist tank capacity
- Height of Seat from Ground 300 mm
- Weight Overall 4.1 kg
- Depth Overall 435 mm
- Width Overall 345 mm
Model Bi-Pot 1513: 13 Litres waist tank capacity
- Weight Overall 4.7 kg
- Depth Overall 435 mm
- Height of Seat from Ground 330 mm
- Width Overall 360 mm
Model Bi-Pot 1520: 20 Litres waist tank capacity
- Depth Overall 435 mm
- Width Overall 360 mm
- Height of Seat from Ground 382 mm
- Weight Overall 4.8 kg
Suppliers (1)
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
All Suppliers
CAMEC Pty Ltd (Archerfield, Welshpool )
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
QLD Suppliers
CAMEC Pty Ltd (Archerfield)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
WA Suppliers
CAMEC Pty Ltd (Welshpool )
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.