A stainless steel tactile ground surface indicator dot for indoor and outdoor use in public areas. It is available in formats for potential hazard indicator (raised dots) and direction of travel indicator (raised rows).
General Details
Extra product information
Material is stainless steel grade 216. Tolerant pedestrian traffic only
Installation
INSTALLATION
Professional installation is required.
All Indicators currently have a profiled plug incorporated into the design of each tactile indicator which suits a pre drilled 8mm hole. The depth of hole is dependant on the substrate material. Typically a 25mm depth hole is sufficient when fixing the tactile indicator to concrete.
Tactile indicators can provide a drill template to assist with drilling to the required matrix standard.
The Building Code of Australia specifies in what situations TGSI must be installed. To comply with the BCA the installation must be in full compliance with the relevant sections of the current AS1428.4. Tactile ground surface indicators for the orientation of people with vision impairment. This standard provides specifications on the form of TGSI and on their installation. Refer to this standard to determine the luminance contrast required between the TGSI and the surrounding ground surface and for installation details including width, length and location for a wide range of applications
Manufacturer/Country
China
Warranty
Contact Supplier for Details
Websites
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Models / Specifications
Model Steel Indicator Stud: Contact suppliers for range of options
Suppliers (2)
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
All Suppliers
Nova Products Global (Canning Vale )
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
Tactile Indicators (Perth) Pty Ltd (Herne Hill, Midland )
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
WA Suppliers
Nova Products Global (Canning Vale )
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
Tactile Indicators (Perth) Pty Ltd (Herne Hill, Midland )
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.