Splash! Aquatic Lift (PR16114)

https://ilcaustralia.org.au/products/16114

The hoist is semi-portable and designed for institutional use, although can be used domestically. The hoist is battery powered and occupant and attendant operated. Movement is both vertical and pivotal. There are 4 models to chose from and additional accessories are available. There is the option for a sling to be used with this pool hoist.

General Details

Method of Use

The typical installation usually involves attaching the lift to the pool deck using a square deck anchor that is cored into the pool deck.

Caution

It is recommended that prior to using this product, training in manual handling and the correct use of this product should be undertaken.

Extra product information

The SPLASH requires an anchor sleeve near the pool edge. The base slides into an anchor sleeve which is installed in the pool deck. The anchor sleeve should be totally encapsulated in concrete. The optimal mounting distance from the edge of the pool for the anchor sleeve is 460mm. The hole should be 180mm deep and 130mm wide.

It does not require access to water or electricity supply except when recharging. The hoist can be positioned anywhere around the pool where there is an anchor sleeve and then put away when not in use.

There is a caddie which is used to transport the hoist when moving to another location or storage.

The hoist is constructed of corrosion resistant materials which are powder coated aluminium and stainless steel. The hoist consists of a mast , boom and portable deck mounted base. The boom has a plastic seat attached. The seat has drainage holes in the seat base and backrest, and swing away arms to allow a side transfer.

The hoist raises and lowers via battery operation. A hand held control is used to lift and lower the boom. The hoist is rotated through 359 degrees, by pushing on the button on the water proof hand control unit attached to a cord. The hand control is submersible so can be left connected while the user is swimming. The control unit can be attendant or user operated. The SPLASH hoist is suitable for use with a below ground pool. Other models cater for above ground pools.

There is a 24 volt battery built in which is re-chargable. The battery is located on the mast of the SPLASH and is removed to a wall mounted charger when required. The green light on the battery indicates a connection to a power source. The orange light on the battery indicates the battery is charging. When the battery is fully charged the orange light goes off.

Options

OPTIONAL EXTRAS
Seat pad

Spineboard attachment- The spine board attachment works with any standard spine board (not included). To use, remove the chair by pulling the attachment pin and replace with the spine board attachment.

All weather cover.

Stability Vest

Manufacturer/Country

United States of America

Websites

Pierce Pool Supplies - Splash Aquatic Lift - http://www.interquad.com.au/Products/Lift_Splash.php

Models / Specifications

Model PLIF10000: Standard

• Width of Seat 470 mm
• Height Overall 1701 mm
• Length Folded 1016 mm
• Height Overall 1701 mm - 1955 mm
• Weight Overall 63.5 kg
• Length Overall 1930 mm - 2184 mm
• Load Capacity (supplier stated) 181.5 kg

Model PLIF10010 : Extended reach

• Length Overall 2209 mm - 2539 mm
• Load Capacity (supplier stated) 136 kg
• Width of Seat 470 mm
• Weight Overall 63.5 kg

Model PLIF10020 : Hi / Lo

• Width of Seat 470 mm
• Weight Overall 63.5 kg
• Height Overall 1600 mm - 2311 mm
• Load Capacity (supplier stated) 181.5 kg
• Length Overall 1676 mm - 2387 mm
• Length Folded 1016 mm

Model PLIF10030 : Spa

• Load Capacity (supplier stated) 181.5 kg
• Width of Seat 470 mm
• Weight Overall 63.5 kg
• Height Overall 1600 mm - 2311 mm
• Length Overall 1625 mm - 2032 mm

Suppliers (0)

Agents (0)

Importers (0)

Manufacturers (0)

Images