EasyStep Platform Lift (PR16513)
EasyStep Platform Lift
https://ilcaustralia.org.au/products/16513
The EasyStep transforms from a set of stairs into a platform lift at the push of a button. This is an easy to operate platform lift to allow safe access for vertical rises up to 1000mm in either a residential or commercial setting. Can be used indoors or outdoors with a load capacity of up to 250kg. Electrically operated with three models available.
General Details
- Extra product information
* The EasyStep is a free standing design that does not require to be installed against a load bearing wall, allowing a wider choice in positioning the location of the lift
* Designed for both indoor and outdoor use, this lift takes up no more floor space than a normal set of stairs
* No pit or separate machine room is required
* Can be incorporated into new and existing projects
* 250V power supply
* Automatically returns to staircase mode when the controls or the safety sensors have not been activated for 60 secondsMethod of lift operation
* Push button with constant pressure
* Automatically returns to staircase position when not operated for 60 seconds.Accessibility of control panel within the lift
* Easy to use two button control panel with quiet operationSafety features
* Alarm sounds before and during the automatic return to staircase mode
* Infra-red movement sensors monitor the area between the steps and under the staircase to prevent entrapment. If activated, movement will stop and an alarm will sound
* Automated ramp provides roll off protection for the wheelchair
* Battery backup in case of power failure
* Emergency stop button- Manufacturer/Country
- EasyStep / Denmark
- Websites
- Easy Living - Easystep Lift - http://www.easy-living.com.au/products/limited-mobility-lifts/EASYSTEP
Models / Specifications
- Model 3 Steps: Lifting height up to 555mm
-
- Model 4 Steps: Lifting height up to 730mm
-
- Model 5 Steps: Lifting height up to 1000mm
-
Suppliers (0)
Agents (0)
Importers (0)
Manufacturers (0)
Images
EasyStep Platform Lift - as steps and as platform
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.