Orion is a hydraulic vertical platform lift which can be installed in a standard-build shaftway, with a minimum pit depth of 100mm. The lift is suitable for domestic and public buildings and can make up to five stops. The platform size can be customised to specific measurements and features a range of different materials for side walls, floor and ceiling.
General Details
Extra product information
Technical Specification
Drive system - hydraulic
Controls - hold to run
Up to 5 Stops
Capacity with control panel - 300 Kg
with cabin (without doors) - 250 Kg
Minimum Pit Dept - 100 mm
Maximum Travel - 15100 mm
Maximum Speed - 0.15 m/s
Maximum Power (motor) - 1.5 kW
Power Supply - 1 phase 240 Volt 50Hz
Car
Platform - with or without ceiling, 3 side access possible
Cabin - closed with sheet metal 2-3 sides
Telephone
Minimum door width 600mm
Shaft
Minimum shaft width - 720mm
Minimum shaft depth - 800mm
Manufacturer/Country
ThyssenKrupp / Netherlands.
Warranty
Contact Supplier for Details
Websites
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Models / Specifications
Model Orion: Vertical platform lift without shaft
- Load Capacity (supplier stated) 300 kg
Suppliers (1)
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
All Suppliers
Atlas Mobility (South Melbourne)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | yes |
VIC Suppliers
Atlas Mobility (South Melbourne)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | yes |
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.