The Zitzi Snapper is a compact indoor high-low base for children and small adults. The height of the seat can be raised and lowered from 46-62cm high. The base can be fitted with manual or electric operation both models have a built in tilt function. The Snapper is designed to work with the Delfi Pro seating system, but can use other seating systems.
General Details
Caution
When completing adjustments to the seat plate always remember to tighten the finger knob on the adjuster to secure the seat plate in a safe locked position before using or moving the chair.
Extra product information
BRAKES
Located on the rear wheel is a parking brake, this has 3 modes which will allow the both wheels to be locked.
Wheel Direction lock (upright)
Neutral (mid position)
Parking Break (downwards)
DRIVING BOW
To adjust the depth of the driving bow, release screws, adjust to desired depth and retighten the screws. This process is also completed with adjusting the angle of the driving bows and the angle of the driving bow handles. Refer to manual for the appropriate screw location.
PUSH BAR
The depth of the push bar can be adjusted by releasing the screws and adjusting the bar to the distance required. Complete this by tightening the screws to secure the bar safely. Only depth and not height can be adjusted on the push bar.
BATTERY (Electric)
Plug the charger into a 220V electric outlet.
Method of Use
SEAT HEIGHT ADJUSTMENT
Seat Height Adjustment (MANUAL)
The seat height can be adjusted between 470-620mm, Release the locking and adjust the seat height, press the foot pedal, while holding one handle on the push bar and release the pedal to the desired height.
Seat Height Adjustment (ELECTRIC)
The seat height can be adjusted between 460 -620mm and adjusted using an electronic controller. The arrows on the controller unit have and up and down arrow.
Height Adjustment with Electric Tilt
When there is the option for for electric tilt, there are additional buttons on the controller to enable the seat base to be raised/ lowered and tilt and straightened.
TILT FUNCTION
Tilt function (MANUAL)
The seat plate angle can be adjusted between +3 deg / -22 deg. Adjust the angle by loosening the finger knob and push the hand lever forward and then push the seat plate forward.
Release the hand leaver to lock the desired angle and then tighten the finger knob to ensure that the angle and seat are locked securely. Always lock the finger knob after any adjustment.
To reset the seat angle to the original position, release the knob, press the hand lever and pull the seat plate up and back by holding the push bar.
Tilt Function (ELECTRIC)
The seat plate angle can be adjusted between +3 deg / -22 deg. Adjust the tilt position by first loosening the finger knob and holding the button on the controller, one moves the seat plate forward tilt and the other for backwards tilt. Release the button on controller when desired tilt position has been achieved. Always tighten the finger knob to secure the tilt position and seat plate are locked.
SEAT MOUNTING
There are different ways to mount the seating system onto the frame.
Fix the adapted prate to the seating system and the base plate to the frame (seat plate. This will be secured by screws and specific points to match up on the seating system and frame. Then combine the two plates together and when teh seating system is secured there is an audible click sound.
Manufacturer/Country
Anatomic SITT / Sweden
Warranty
1 year manufacturer warranty on structural compnents.
Websites
- Supplier weblink - http://www.motum.com.au/snapper
- Manufacturer Manual PDF - http://www.anatomicsitt.com/en/infomaterial/data/snapper_technical-data.pdf
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Models / Specifications
Model Electric Model: Snapper Mobility Base
- Width of Seat 320 mm
- Depth of Seat 260 mm
- Range of Tilt In Space -22 degrees - 3 degrees
- Width Overall 530 mm
- Depth Overall 590 mm
- Height of Seat from Ground 470 mm - 620 mm (neutral position )
- Diameter of Castor 100 mm
- Weight Overall 21 kg
- Load Capacity (supplier stated) 75 kg
Model Manual Model: Snapper Mobility Base
- Width of Seat 320 mm
- Depth of Seat 260 mm
- Range of Tilt In Space -22 degrees - 3 degrees
- Width Overall 530 mm
- Depth Overall 590 mm
- Height of Seat from Ground 470 mm - 620 mm (neutral position )
- Diameter of Castor 100 mm
- Weight Overall 16 kg
- Load Capacity (supplier stated) 50 kg
Features
Contact listed suppliers to confirm features, options and models available.
Brakes
Suppliers (2)
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
All Suppliers
Motum (Osborne Park)
Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
---|---|---|---|---|
0.0 - 0.0 (Starting from $1500 Starting from $2200) | unknown | unknown | Via order |
All Importers
Astris PME (formerly Paediatric Mobility Equipment) (Boolaroo, Ingleburn, Ravenhall, Seven Hills, Wynnum, Young)
NSW Importers
Astris PME (formerly Paediatric Mobility Equipment) (Boolaroo, Ingleburn, Seven Hills, Young)
WA Suppliers
Motum (Osborne Park)
Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
---|---|---|---|---|
0.0 - 0.0 (Starting from $1500 Starting from $2200) | unknown | unknown | Via order |
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.