KIS Mk1 Manual Wheelchair (PR19215)
KIS Mk1 Manual Wheelchair - side view
https://ilcaustralia.org.au/products/19215
A folding manual wheelchair which can be custom made to suit the user's size. The centre of gravity is forward on this chair, suiting a more active user. It is made of a lightweight tubing which can be powder coated in any colour. A range of accessories/options is available to suit the user's requirements.
General Details
- Crash Test Information for Wheeled mobility devices
Due to the lightweight nature of this wheelchair, it is not suitable for use as a seat in a motor vehicle.
At the time of writing, there has been no testing done to ensure that this wheelchair will withstand high torque forces and as such is not currently endorsed for use with power assist devices such as powered wheels.
- Extra product information
The centre of gravity is forward in this chair, allowing increased maneuverability. Tipping the wheelchair to get over small changes in the ground surface, which may be difficult to roll over, is easier with this frame set-up.
- Manufacturer/Country
- Surgical Engineering Queensland Co Ltd / Australia
- Websites
- KIS Mk1 Wheelchair - http://www.sureng.com.au/kisI.htm
Features
Accessories
-
Wheelchair accessories:
- calf strap
- clothing protectors/side panels
- spoke guards
- tray table
Transport and Dismantling
-
Wheelchair transport:
- folds for transport
Brakes
-
Manual Wheelchair brake options:
- an extended lever
- lever type
-
Manual Wheelchair brakes:
- push to lock
Wheels
-
Wheelchair tyre options:
- pneumatic
- solid
-
Wheelchair castor options:
- pneumatic
- solid
-
Wheelchair tyres:
- quick release axles
Footplates
-
Wheelchair footplate options:
- fixed
- lift up platform
- one piece
- swing away
- two piece
Legrests
-
Wheelchair legrest options:
- fixed height
- heavy duty
- length adjustable
- swing away
Armrests
-
Wheelchair armrests:
- desk length
- full length
- optional
-
Wheelchair armrest options:
- fixed height
- height adjustable
- removable
Frame
-
Manual Wheelchair frame:
- chrome moly
- folding
Models / Specifications
- Model KIS MK1: one model available
-
- Load Capacity (supplier stated) 100 kg
- Height of Seat from Ground (customisable)
- Depth of Seat 400 mm (customisable)
- Width of Seat 340 mm - 500 mm (customisable at 20mm increments)
- Weight Overall 11.5 kg (Standard weight)
- Seat to top of backrest (customisable)
- Angle of Legrest Hanger 70 degrees (unless otherwise specified)
- Length of Legrest (customisable)
- Diameter of Rear Wheel 20.0, 22.0, 24.0, or 26.0 inch (508mm, 559mm, 610mm, 660mm)
- Diameter of Castor 5.0, 6.0, 7.0, or 8.0 inch (127mm, 152mm, 178mm, 203mm )
- Camber of Wheels 0 degrees
Suppliers (0)
Agents (0)
Importers (0)
Manufacturers (0)
Images
KIS Mk1 Manual Wheelchair - front view
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.