KIS Mk2 Manual Wheelchair (PR19222)
KIS Mk2 Manual Wheelchair - shown with lift off footplate
https://ilcaustralia.org.au/products/19222
A folding manual wheelchair which can be custom made to suit the user's size. The centre of gravity is further back on this chair, increasing stability. It is made of a lightweight tubing which can be powder coated in any colour. A range of accessories/options are available to suit the user's requirements.
General Details
- Crash Test Information for Wheeled mobility devices
Due to its lightweight nature, this wheelchair is not designed to be used as a seat in a motor vehicle. The user must transfer to a car seat and then the wheelchair can be folded for stowage.
At the time of writing, this wheelchair has not been tested to withstand the forces that are placed on the frame when using add-on powered devices. As such, this wheelchair is not currently endorsed for use with power assist devices such as powered wheels.
- Manufacturer/Country
- Surgical Engineering / Australia
- Websites
- KIS MK2 Wheelchair - http://www.sureng.com.au/kisII.htm
Features
Accessories
-
Wheelchair accessories:
- calf strap
- tray table
Transport and Dismantling
-
Wheelchair transport:
- folds for transport
Brakes
-
Manual Wheelchair brake options:
- an extended lever
- lever type
-
Manual Wheelchair brakes:
- push to lock
Wheels
-
Wheelchair tyres:
- pneumatic
- quick release axles
- solid
-
Wheelchair castors:
- pneumatic
- solid
Footplates
-
Wheelchair footplate options:
- fixed
- folding platform
- lift up platform
- swing away
-
Wheelchair footplates:
- one piece
- two piece
Legrests
-
Wheelchair legrest options:
- fixed height
- heavy duty
- length adjustable
- removable
- swing away
Armrests
-
Wheelchair armrests:
- desk length
- full length
- optional
- sideguards
-
Wheelchair armrest options:
- fixed height
- height adjustable
- removable
Frame
-
Manual Wheelchair frame:
- chrome moly
- folding
- lightweight
Models / Specifications
- Model KIS Mk2: one model available
-
- Height of Seat from Ground (customisable)
- Depth of Seat 400 mm (or customisable)
- Load Capacity (supplier stated) 100 kg
- Height of Backrest (customisable)
- Width of Seat 340 mm - 500 mm (customisable at 20mm increments)
- Weight Overall 12 kg (Standard weight)
- Height of Armrest (customisable)
- Angle of Legrest Hanger 70 degrees (unless otherwise specified)
- Diameter of Castor 5.0, 6.0, 7.0, or 8.0 inch (127mm, 152mm, 178mm, 203mm; or rollerblade style)
- Diameter of Rear Wheel 20.0, 22.0, 24.0, or 26.0 inch (508mm, 559mm, 610mm, 660mm )
- Length of Legrest (customisable)
- Camber of Wheels 0 degrees
Suppliers (0)
Agents (0)
Importers (0)
Manufacturers (0)
Images
Close-up view of wheel/axle placement
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.