1300 885 886 Independent Living Centres Advisory Service

Patient Support Systems Air-Lo 3 Alternating Air Overlay (PR19483)

32067 ptm001 zoom 1

Air-Lo 3 Alternating Overlay

https://ilcaustralia.org.au/products/19483

An alternating air overlay designed to prevent pressure injury and skin breakdown. It features a static head section, compact silent control unit and can support up to 110kg. The overlay is made up of 22 alternating air cells covered with a two way stretch cover which is welded for infection control. Available in single size only.

General Details

Extra product information

Structure
* 22 pure TPU transverse air cells alternate one in every two. They stretch under the user for comfort and pressure injury prevention.
* Alternating mode time is 14 minutes per cycle.
* Static head section eliminates patient dizziness and disorientation.

Cover
* Two way stretch top cover is fully welded and can be high temperature washed for total infection control.
* Cover is water resistant and vapour permeable (breathable)
* All waterfall edges are turned and welded for maximum infection control and zip protection.

Attachment
* Elasticised side straps securely bond the overlay to any regular single mattress.

Pump / Controls
* Analogue control unit features a manual comfort dial, static mode with a 60 minute auto time-out and simple diagnostics. Intermittent operation promotes long pump life.

Safety feature
* Medical grade power cord is run inside the mattress to avoid the risk of tripping over cord running under the bed or on the floor.

Option Details
* An optional internal Air-Lo hyper-stretch coverlet can be fitted to top cover.

Manufacturer/Country
Taiwan

Models / Specifications

Model PTM636629: Air-Lo 3 Mattress Overlay
  • Load Capacity (supplier stated) 120 kg
  • Number of Air Cells 22 units
  • Length 2000 mm
  • Width 900 mm
  • Height 100 mm
Model PTM636625: AirLo - Thermal Hyperstretch Microfibre Coverlet

Suppliers (1)

Agents (0)

    Importers (0)

      Manufacturers (0)

        Maintenance

        Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

        Standards

        Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation

        Disclaimer

        Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.