Homecraft Easy Bar Suction Grab Rail (PR20132)
Homecraft Easy Bar Suction Grab Rail
https://ilcaustralia.org.au/products/20132
The Homecraft Easy Bar Suction Grab Rail is a temporary grab rail solution which utilises two suction discs to attach to non-porous surfaces such as tiles, glass, fibreglass or porcelain. The Grab Rail has a safety lock that will display green when it is secure and red when it is not secure.
General Details
- Additional Specifications
Suction cup diameter is 93mm
- Caution - Suction Grab Rails
. The rails are not designed to support full body weight
. Always check the rail is secure before use
. Do not attach to moving surfaces
. The device should be used only for short term periods. With prolonged usage periods, check for firm holding of the suction device. The rail should be re-attached if suction begins to fail
. The suction device will only adhere as well as the base layer itself. Before using the device check the adhesive properties of the substratum (eg the tile on the wall, plaster)
. High climatic temperature (ie above 30 degrees celsius) will reduce the tensile force
. Use under water reduces adhesive power
. Never use a rail with damaged suction discs as the suction will not hold.
. The device should only be used on a smooth, non-porous surface that is steam tight, clean, dry and free of dust, oils and greases
. The suction discs must not be positioned over grout lines
. The suction devices themselves must be kept clean, dry and free of oils and grease
. Do not release the device with sharp instruments, as this may damage the suction discs
. This rail is not designed to support the whole body weight
. Check users' manual for further information- Manufacturer/Country
- Patterson Group/USA
- Websites
- - http://patienthandling.com.au/homecraft-easy-bar-suction-grab-rail/
Features
Set Up or Installation
-
Rail attachment / installation:
- suction
Suitability
-
Rail applications:
- internal
- wet area
Style
-
Rail configuration:
- straight
Models / Specifications
- Model Wall mounted rail: Suction
-
- Length Overall 500 mm
Suppliers (0)
Agents (0)
Importers (0)
Manufacturers (0)
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.