A mobile adjustable height, tilting top table for use over bed or chair. It has a split that maintains the horizontal plane. The laminate table top has raised edges in sections and rounded edges. The U shaped frame base is powder coated 2mm reinforced steel tubing with four 50mm castors, two of which are lockable. It is available with a gas mechanism for height adjustment.
General Details
Height adjustment mechanism
Spring mechanism: The vertical shaft of the frame has a telescopic adjustment mechanism with an interior locking spring. The table is held at the desired height by a small knob that is screwed into position.
Gas mechanism: The vertical shaft of the frame has assisted height adjustment from 700mm to 1100mm and dampened return. A gentle squeeze action on the lever is required to lower the table.
Manufacturer/Country
CodaCare / Australia
Warranty
3 years on frame, contact the supplier to confirm details
Websites
- Tilt Top Overbed Tables Evo One Tilt - https://www.codacare.com.au/products/hospital-overbed-tables/tilt-top-overbed-tables-evo-one-tilt/
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Models / Specifications
Model Split Tilt Top: Standard with spring or gas adjustment
- Height 740 mm - 1100 mm
- Length of Table Top 900 mm
- Width of Table Top 400 mm
- Diameter of Castor 50 mm
- Load Capacity (supplier stated) 30 kg
- Length of Base 730 mm
Suppliers (1)
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
All Suppliers
CodaCare (Dandenong South)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 (Please note: Codacare will not supply to WA for small orders ) | unknown | unknown |
VIC Suppliers
CodaCare (Dandenong South)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 (Please note: Codacare will not supply to WA for small orders ) | unknown | unknown |
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.