Tip Up Plate Vehicle Transfer Platform (PR20187)
Kivi Tip-up Plate
https://ilcaustralia.org.au/products/20187
A transfer plate used by people who find it difficult to transfer from a wheelchair to the car seat and vice versa. It attaches to the car, next to the car seat (driver or passenger) and is used to bridge the gap between the car seat and wheelchair. A manual or powered model is available. The manual model is set at a static height, whereas the powered option is height adjustable, to assist with the transfer between 2 different heights.
General Details
- Caution: Vehicle Modifications
You are legally required to advise your State licensing authority of any medical condition or disability that may impact on your driving. If not, you risk fines or legal action and your car insurance can be affected. You may need to provide medical reports or undergo driving tests. Modifications to your vehicle must be in line with the Australian safety and design rules. Fitting of wheelchair occupant restraints, child restraints and vehicle hoist ramps must meet relevant Australian Standards. Modifications should be done by suitably qualified vehicle modifiers. You will also need to inform your car insurer of any vehicle modifications. Your policy may become void if you do not do so. Contact the vehicle licensing / registration authority in your State for more information.
- Additional Specifications
The electric tip up plate is able to adjust from the car seat height down to 500mm above the door sill.
- Manufacturer/Country
- Kivi / Italy
- Websites
- Engineering Mobility - http://www.mobilityengineering.com.au/products/range/transfer-platforms
Models / Specifications
- Model RM205 - size 2: Manual - size 2
-
- Load Capacity (supplier stated) 120 kg
- Length Overall 470 mm
- Depth Overall 220 mm
- Model RE205 - size 4: Electric - size 4
-
- Load Capacity (supplier stated) 120 kg
- Length Overall 440 mm
- Depth Overall 330 mm
- Model RE205 - size 1: Electric - size 1
-
- Load Capacity (supplier stated) 120 kg
- Length Overall 470 mm
- Depth Overall 120 mm
- Model RM205 - size 1: Manual - size 1
-
- Load Capacity (supplier stated) 120 kg
- Length Overall 370 mm
- Depth Overall 220 mm
- Model RE205 - size 3: Electric - size 3
-
- Load Capacity (supplier stated) 120 kg
- Length Overall 380 mm
- Depth Overall 330 mm
- Model RE205 - size 2: Electric - size 2
-
- Load Capacity (supplier stated) 120 kg
- Length Overall 380 mm
- Depth Overall 270 mm
Suppliers (0)
Agents (0)
Importers (0)
Manufacturers (0)
Images
Kivi Tip-up Plate
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.