Funke X-Seat Cushion (PR20292)
Funke X-Seat Cushion
https://ilcaustralia.org.au/products/20292
A foam contoured cushion. It consists of a bottom hyperelastic layer and top visco foam layer designed to provide pressure relief for the user. The cover is removable and can be washed up to 60 degrees.
General Details
- Caution: Pressure Cushions & Mattresses
• All pressure reduction products must be monitored to prevent 'bottoming out'. This occurs when the user's weight bears down so hard on the product material that it is flattened and the bony parts are pressed against the surface below the cushion or mattress. Where bottoming out occurs even with correct use (e.g. correct inflation levels), a different product may need to be considered.
• Sometimes, due to the user deteriorating, the product may become unsuitable. Continuous monitoring is necessary and alternative products may be recommended.
• There are many things to consider when selecting pressure care products including nutrition, skin moisture, level of mobility, age shear, friction, location of pressure ulcer (if present) and hygiene. Any comments regarding level of pressure care is a suggestion made by suppliers as a guide to assist with selection, and this may differ from brand to brand. When selecting pressure care products it is strongly advised that a comprehensive assessment is undertaken by a health professional to encourage correct product selection and monitoring of product effectiveness.
- Manufacturer/Country
- Germany
Models / Specifications
- Model Funke X-Seat Cushion 19" x 18": 19" x 18"
-
- Load Capacity (supplier stated) 20 kg - 120 kg
- Width of Seat 480 mm
- Model Funke X-Seat Cushion 15" x 15": 15" x 15"
-
- Load Capacity (supplier stated) 20 kg - 120 kg
- Width of Seat 380 mm
- Width of Seat 400 mm
- Model Funke X-Seat Cushion 16" x 16": 16" x 16"
-
- Load Capacity (supplier stated) 20 kg - 120 kg
- Depth of Seat 420 mm
- Width of Seat 420 mm
- Model Funke X-Seat Cushion 18" x 16": 18" x 16"
-
- Load Capacity (supplier stated) 20 kg - 120 kg
- Depth of Seat 420 mm
- Width of Seat 450 mm
- Model Funke X-Seat Cushion 18" x 18": 18" x 18"
-
- Load Capacity (supplier stated) 20 kg - 120 kg
- Width of Seat 450 mm
- Depth of Seat 440 mm
- Model Funke X-Seat Cushion 18" x 19": 18" x 19"
-
- Load Capacity (supplier stated) 20 kg - 120 kg
- Width of Seat 450 mm
- Depth of Seat 460 mm
- Model Funke X-Seat Cushion 19" x 19": 19" x 19"
-
- Width of Seat 480 mm
- Load Capacity (supplier stated) 20 kg - 120 kg
- Depth of Seat 460 mm
Suppliers (0)
Agents (0)
Importers (0)
Manufacturers (0)
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.