1300 885 886 Independent Living Centres Advisory Service

Panthera U3 Manual Wheelchair (PR20427)

25374 panthera u3 500

Panthera U3

https://ilcaustralia.org.au/products/20427

A lightweight rigid wheelchair designed for active users. It features a tapered one-piece footrest and a one-handed brake. The backrest and balance point of the chair can be adjusted. It has an integrated anti-tip device that can be folded in and out by the user while you are seated in the wheelchair. Armrests and side guards are optional. The soft upper section of the side guards fold down when loaded such as when moving into or out of the wheelchair. The user can place their hands on the side guards to lift themselves up an down.

General Details

Options

Rear wheels: standard or Spinergy
Push handles: fixed, foldable or push bar
Armrests
Anti-tips
Cushions
Accessories: seat bag, crutch holder, backpack

Manufacturer/Country
Sweden
Websites
Panthera U3 - http://www.panthera.se/en/produkt_U3.html

Features

Accessories

  • Wheelchair accessories:
    • anti-tips
    • armrests
    • clothing protectors/side panels
    • crutch holder
    • spoke guards
    • under seat bag

Brakes

  • Manual Wheelchair brake options:
    • scissor type

Footplates

  • Wheelchair footplate options:
    • one piece

Push handles

  • Manual Wheelchair push handles:
    • height adjustable

Models / Specifications

Model Panthera U3: One model only
  • Height of Backrest 200.0, 250.0, 300.0, 350.0, 400.0, or 450.0 mm
  • Diameter of Castor 90.0 and 120.0 mm
  • Weight Overall 8 kg (approximately)
  • Width of Seat 330.0, 360.0, 390.0, 420.0, or 450.0 mm
  • Load Capacity (supplier stated) 100.0 and 150.0 kg ((100kg for seat width 330-420mm, 150kg for seat width 420-450mm))
  • Height of Seat from Ground 430 mm (rear)
  • Height Overall 640 mm - 840 mm
  • Depth Overall 840 mm
  • Width Overall 540.0, 570.0, 600.0, 630.0, or 660.0 mm
  • Height of Seat from Ground 470 mm (front)
  • Depth of Seat 350 mm - 460 mm

Suppliers (0)

    Agents (0)

      Importers (0)

        Manufacturers (0)

          Maintenance

          Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

          Standards

          Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation

          Disclaimer

          Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.