Salli Ergonomic Divided Saddle Seat (PR20629)
Salli Job
https://ilcaustralia.org.au/products/20629
Saddle stool designed with divided seat, which aims to further reduce pressure compared to a standard saddle seat. Different models, colours and accessories available. Models come standard with a medium size gas lift, however a low or tall gas lift is also available to suit people shorter than 165cm or taller than 180cm.
General Details
- Options
Salli stools come standard with the medium size gas spring, however short and long springs also available as an optional feature.
Optional accessories include:
- all around back support (width 50mm and length 610mm)
- elbow rest (Salli Sway only)
- foot support ring (460mm diameter)
- large castor base (620mm diameter) - recommended for chairs with a long spring or accessories / attachments
- weight activated friction castors (50mm diameter) - castors lock when there is no weight on the chair, and release once weight is applied to the chair so that the chair can move freely- Manufacturer/Country
- Salli Systems / Finland
- Websites
- Buy Direct specifications - http://buydirectonline.com.au/office-chairs/saddle-stools/salli-job
- Salli Saddle chairs - http://salli.com/en
Models / Specifications
- Model Salli Job: Described as entry level design; comes standard with plastic base, fixed seat and hard castors.
-
- Height of Seat 590 mm - 789 mm (Option for short gas spring (goes down to 480mm) and long (goes up to 905mm))
- Diameter of Castor 65 mm
- Weight Overall 6.5 kg
- Load Capacity (supplier stated) 120 kg
- Model Salli Sway: Seat has rocking mechanism aiming to mobilise back; comes standard with aluminium base and soft castors.
-
- Diameter of Castor 65 mm
- Height of Seat 600 mm - 785 mm (Option for short gas spring (goes down to 490mm) and long (goes up to 890mm))
- Load Capacity (supplier stated) 120 kg
- Weight Overall 11.5 kg
Suppliers (0)
Agents (0)
Importers (0)
Manufacturers (0)
Images
Sally Sway
Pressure map
All around back support
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.