1300 885 886 Independent Living Centres Advisory Service

S11 Low Rise Platform Lift (PR21433)

28199 s11 platform lift

S11 Low Rise Platform Lift

https://ilcaustralia.org.au/products/21433

An electrically operated free standing platform lift designed for vertical rises of up to two metres. Suitable for outdoor installation. Available to a wide range of projects and buildings from aged care facilities, to schools, and private homes. No pit or separate machine room is required for installation. Complies with Australian Standard 1735.14/15 for limited mobility platform lifts.

General Details

Extra product information

Drive System
* Belt

Configuration
* Through car platform

Persons
* The lift can transport two persons or a wheelchair

Maximum number of stops
* Two

Machine room
* Not required. The motor is integrated with running face

Gate
* 950W x 1100H mm with automatic closers

Power
* Single phase power consumption also ensures energy efficiency and low running costs

Control
* The control panel is both on board and on the floors.
* Soft start / stop system (soft start and stop)

Safety
* Safety features include hold to run controls (needs constant pressure to operate), safety edge-under platform proximity sensors, emergency stop button on the platform, electronic speed control, overload detector and other safety features
* A handrail is integrated with lift platform (positioned on both sides)

24/7 Call Centre Assistance
* Every platform lift installed has access to supplier's 24 hour call centre

Manufacturer/Country
Europe
Websites
Easy Living Platform Lifts - S11 - http://easylivingplatformlifts.com.au/s11-platform-lift/

Models / Specifications

Model S11: Low rise platform lift
  • Load Capacity (supplier stated) 300 kg
  • Distance of Travel 1999 mm (maximum)
  • Depth External 1770 mm
  • Depth of Platform 1400 mm
  • Width of Platform 1100 mm
  • Width external 1300 mm
  • Speed 0.05 mps

Suppliers (0)

    Agents (0)

      Importers (0)

        Manufacturers (0)

          Maintenance

          Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

          Standards

          Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation

          Disclaimer

          Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.