1300 885 886 Independent Living Centres Advisory Service

Enware Wellbeing Sequential Basin Mixer 65mm Lever with 165mm Spout (PR22011)

29738 wbbsq65 165

Enware Wellbeing Sequential Basin Mixer 65mm Lever with 165mm Spout

https://ilcaustralia.org.au/products/22011

The sequential lever turns progressively from "off" to "cold" to "mixed" (or hot). This enhances safety, reduces hot water consumption and potentially reduces risk of legionella. Oversize tubular spouts has been designed to ensure a minimum of splashing with laminar flow outlets and flows regulated to ensure water efficiency. Optimised spout lengths to avoid water flowing directly into waste to prevent aeration of bacteria. Key features: - Ergonomic anti-bacterial tactile lever - Seamless single lever progressive mixing - Colour Indicators for hot/cold/warm - Long reach spout capable of being fixed or swivel - Water efficient laminar flow outlets to WELS Requirements - O-ring seals to bench top with 350mm flexible hose to hot and cold inlets with 1/2" BSP thread connection

General Details

Manufacturer/Country
Enware / Australia
Websites
Enware Wellbeing Sequential Basin Mixer 65mm Lever with 165mm Spout - https://www.enware.com.au/Product/WBBSQ65-165

Models / Specifications

Model Enware Wellbeing Sequential Basin Mixer 65mm Lever with 165mm Spout: Available in 5 Star and 6 Star WELS ratings.

Suppliers (0)

    Agents (0)

      Importers (0)

        Manufacturers (0)

          Maintenance

          Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

          Standards

          Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation

          Disclaimer

          Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.