BetterLiving Mattress Overlay and Replacement System (PR23555)
Mattress overlay with cover open
https://ilcaustralia.org.au/products/23555
A powered, alternating air mattress system available as an overlay or mattress replacement. It is designed for users at risk to high risk of pressure injury. It features AutoCair technology to adjust the pressure setting based on the user's weight, manual adjustments can still be made for comfort.
General Details
- Caution: Pressure Cushions & Mattresses
• All pressure reduction products must be monitored to prevent 'bottoming out'. This occurs when the user's weight bears down so hard on the product material that it is flattened and the bony parts are pressed against the surface below the cushion or mattress. Where bottoming out occurs even with correct use (e.g. correct inflation levels), a different product may need to be considered.
• Sometimes, due to the user deteriorating, the product may become unsuitable. Continuous monitoring is necessary and alternative products may be recommended.
• There are many things to consider when selecting pressure care products including nutrition, skin moisture, level of mobility, age shear, friction, location of pressure ulcer (if present) and hygiene. Any comments regarding level of pressure care is a suggestion made by suppliers as a guide to assist with selection, and this may differ from brand to brand. When selecting pressure care products it is strongly advised that a comprehensive assessment is undertaken by a health professional to encourage correct product selection and monitoring of product effectiveness.
- Manufacturer/Country
- Novis
- Websites
- Novis BetterLiving Replacement/Overlay - https://www.novis.com.au/product/betterliving-alternating-pressure-mattresses/
Models / Specifications
- Model Mattress Overlay APMBL-L01: To be used on top of an existing mattress, suitable for at risk to high pressure injury risk users
-
- Length Overall 2000 mm
- Width Overall 880 mm
- Number of Air Cells 18 units
- Load Capacity (supplier stated) 40 kg - 150 kg
- Height Overall 130 mm
- Weight 4.5 kg (Mattress)
- Model Mattress Replacement APMBL-R01: To replace existing mattress, suitable for high to very high pressure injury risk users
-
- Weight 8 kg (Mattress )
- Height Overall 200 mm
- Width Overall 880 mm
- Number of Air Cells 18 units
- Load Capacity (supplier stated) 40 kg - 180 kg
- Length Overall 2000 mm
Suppliers (0)
Agents (0)
Importers (0)
Manufacturers (0)
Images
Mattress replacement with cover open
Mattress control unit
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.