General Details

Extra product information

Frame: Non folding frame manufactured from alloy tube to reduce frame weight. Available in a choice of colours from the Dulux powder coating paint chart or from new car colours.
Upholstery: Waterproof dacron with adjustable sling tension of the seat.
Seat: Customisation of seat depth and width is available. The seat width on this chair is measured between the outside edges of the frame. Therefore the seat upholstery measurement may be narrower than the seat width measurement - ask the supplier to measure accurately if there any doubts as to the required width.
Backrest: Backrest height can be customised to suit individual needs. Standard sizes are 200-300 mm, 300-380 mm, 380-480 mm.
There is an extended flap that connects to the seat with hook and loop tape - this allows the backrest height to be adjusted. The backrest folds forwards onto the seat for transport.
Drive wheels: 610 mm diameter quick release wheels with alloy wheel rims and push rims, multi position axle plate in both the horizontal and vertical planes, camber adjustment; precision sealed bearings. Options: Quad release axles, choice of rear tyre size - 20", 24" or 26". BMX wheels are available however quick release axles cannot be fitted to these. An extensive range of tyres,wheels and rims are also offered as add-on cost items.
Castors: 125 mm (5") polyurethane front castors with castor angle adjustment; high tensile castor forks. Options: wide range of sizes and materials available at extra cost, including alternative polyurethane castor diameters of 3", 6",7" and 8", or pneumatic castors available in 6" or 8" only, castor locks.
Armrests: Not supplied as standard. Options: removable or flip-up armrests. Skirt guards are available in either plastic or fabric.
Legrests: Standard chair is supplied with a fixed single piece footplate. Options: swingaway and/or removable legrests, elevating legrests.
Brakes: Not supplied as standard. Options: brakes can be fitted to the chair using either a low or high mounting.

Other Options/accessories:
. Cushion with cover.
. Extending back push handles.
. Anti-tip tubes.
. Locking back to vertical position.
. Front end stabiliser.
. Frame guards to prevent scratching front rails.
. Tapered front.

Dismantling: Quick release wheels are removed and back folded down onto seat. Main frame is a rigid unit that does not fold.

Manufacturer/Country

Mobility Plus, Victoria Australia

Websites

• Wedge brochure - http://www.mobilityplus.com.au/library/separate_pages/manual_mobility_pages/Wedge.pdf

Maintenance

Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

Models / Specifications