A wheelchair and occupant restraints system for use in wheelchairs and buses. The wheelchair and occupant are restrained separately.
Extra product information
. 4 point tie down for wheelchair
. restraint track is bolted to van floor
. one end of the attachment strap slots into the track and the other is attached to the wheelchair.
. strap assemblies are one inch wide and can be used for manual and motorised wheelchairs.
. straps are tensioned to prevent the wheelchair from moving and are easily released.
The Kinedyne kit FE501 contains 4 wheelchair restraint belts, 4 slot sections of restraint track and backing plates, a lap belt, instruction booklet and wall decal for on-site instructions. A shoulder sash belt in an optional extra and is recommended in the Australian Standards.
Licensing and Insurance Requirements
You are legally required to advise your State licensing authority of any medical condition or disability that may impact on your driving. If not, you risk fines or legal action and your car insurance can be affected. You may need to provide medical reports or undergo driving tests. Modifications to your vehicle must be in line with the Australian safety and design rules. Fitting of wheelchair occupant restraints, child restraints and vehicle hoist ramps must meet relevant Australian Standards. Modifications should be done by suitably qualified vehicle modifiers. You will also need to inform your car insurer of any vehicle modifications. Your policy may become void if you do not do so. Contact the vehicle licensing / registration authority in your State for more information.
Kinedyne / USA
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Models / Specifications
Model FE500 Series: One model only
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
|Supplier Code||Price & Price Notes||Hire?||Repair?||Availability|
|0.0 - 0.0||unknown||unknown|
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.