General Details

Caution: Lifting and Transferring people - Hoists

It is recommended that prior to using this product. training in manual handling and the correct use of assistive devices should be undertaken.

Extra product information

The mast requires a cement in sleeve requiring a 150mm hole drilled to a depth of 200mm for the portable option. A sleeve with a nylon bearing is then cemented into the hole.
The hoist can be removed from the socket when not in use and can also be used in other places by installing additional sockets.
The mast can be attached to a surface mount assembly which is fixed into the ground if the fixed option is required.
The hydraulic pump handle is attached to the mast to raise the hoist.
A screw knob situated located in the hydraulic cylinder is released to lower the hoist.

===

. Swivels through 360 degrees.
. Has option of an extension arm that increases the horizontal reach by 510mm.
. Made from steel, with stainless steel painted finish, designed to resist
humid, corrosive swimming pool environment.
. Flush mounted recessed socket requires a 150mm diameter hole, 200mm deep.
. No under water installation.
. Optional surface mount socket where there is adequate mounting strength.

Manufacturer/Country

United Kingdom

Warranty

12 months

Websites

• Hoyer Classic Pool Hoist - http://www.1800wheelchair.com/asp/view-product.asp?product_id=4490

Maintenance

Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

Models / Specifications