The Skil-Care Multi Pro Fall Safety Alarm is designed to alert caregivers when a person has left or fallen from a chair. It can be used with a range of sensors including chair sensor, under seat sensor, under bed sensor, and seat belt with buckle sensor. The alarm unit is battery powered and mountable to a chair or other surface. When activated, the alarm unit flashes and emits a buzzer or musical tone, which can be adjusted in volume.
General Details
Extra Equipment / Materials for Use
Requires one of the following sensors:
- Chair Sensor Pads (7" x 15") - alarm activates if the resident leaves or falls from the chair.
- Under Seat Sensor (fits 18"-22" wheelchairs) - alarm activates when the resident rises and automatically resets when the resident sits. It is equally effective with or without a cushion on the wheelchair.
- Levelling Pad Sensor (fits 16"-18" wheelchairs) - similar to the chair sensor pad except that the sensor is protected in a vinyl pocket beneath the leveling pad. A wheelchair cushion is required (sold separately).
- Under Mattress Sensor Pad (20" x 30") - can also be used above the mattress.
- Seat Belt with Buckle Sensor (70" long) - alarm sounds when buckle is released and automatically resets when buckle is secured. Secures to standard wheelchairs with existing seat screws.
Manufacturer/Country
Skil-Care / USA
Warranty
1 year
Websites
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Models / Specifications
Model Multi Pro Fall Safety Alarm Unit: One model only
Suppliers (1)
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
All Suppliers
HealthSaver Pty Ltd (Mansfield)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
QLD Suppliers
HealthSaver Pty Ltd (Mansfield)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.