A small lightweight portable angled work surface which is adjustable in angle. A full width page holder can be positioned anywhere on the board. There are two removable paper ledges which can be slipped into place at the base of the work surface. The adjustable legs can be removed and clipped into place on the base of the work surface so the board can be stored flat.
General Details
Extra product information
. made of melamine with a white finish;
. raises from 10 degree to 40 degree angle. Optional longer legs raise it to 48 degrees.
. One ledge can be removed to enable the wrist to rest on the board while writing. The ledges are reversible to provide a choice of two support depths - 12mm or 20mm.
CAUTION
When the board is positioned at a shallow angle, the adjustment legs point upward above the board. Be careful not to damage eyes or other body parts by coming into contact with the top of the adjustment legs.
Cover the ends with something large and soft if possible.
Method of Use
. adjust the angle by unscrewing the black knobs in each top corner and sliding the legs through holes in the corner until desired angle of board is reached. Tighten knobs;
. to position page holder, slide white clips on both sides of board up and down along edge;
. position one paper ledge in slot along base of board. To leave space for forearm to rest, place it in centre of board.
. to fold flat for carrying or for storage, release knobs, remove both legs and lock into slots underneath the board. Pull carry handle upward to carry the board.
Manufacturer/Country
Contact Supplier for Details
Warranty
Contact Supplier for Details
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Models / Specifications
Model Lita Boards : Available in 4 sizes.
- Width Overall 350 mm - 800 mm
- Weight 1.8 kg - 2.6 kg
- Depth Overall 250 mm - 450 mm
Suppliers (1)
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
All Suppliers
Comfort Discovered (Asquith, Hornsby)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
NSW Suppliers
Comfort Discovered (Asquith, Hornsby)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.