General Details

Maintenance

All scooters require regular maintenance. Refer to the User Manual or supplier for specific details.

Extra product information

A rear wheel drive scooter with a basic padded desk style seat. The backrest can be folded forward. The scooter is available in a red or blue frame trim.

Scooter has luminescent ON/OFF switch, a push button horn and adjustable speed control.

The tiller is angle adjustable to multiple angle positions using the adjustment lever screw which is situated at the front of the tiller.

Transporting the scooter is possible by removing the seat by pulling on the lever under the right hand side of the seat. The backrest folds flat onto the seat. The batteries are disconnected by lifting the handle from the hook and loop tape that secures the batteries to the base. The tiller is then lowered down to the centre of the chassis and the back wheel/motor section is disconnected by pushing the marked lever. The scooter disassembles into a total of four parts.

Freewheeling mechanism is operated by a lever situated next to the rear right wheel.

Battery Charging is achieved by connecting the battery charger cord to a power outlet.

Batteries are two 12 amp batteries stored under the seat, held in place with webbing straps.

Rear Wheels are 65mm(2.5") wide, 230mm(9") diameter, foam filled tyre.

Front Wheel is a 75mm(3") wide, 200mm(8") diameter, foam filled tyre.

Footrest is a flat, slip resistant surface. The feet can be placed either side of the tiller base.

Armrests are lift up and are width adjustable via screw knob adjustment.

Controls are thumb or finger levers for acceleration and reverse functions, a speed control with fast/slow indicators and a display for battery status. The two separate control handles are foam padded.

Brakes are electromagnetic

Basket attaches to the front of the tiller.

Options

flag
crutches holder
rear carry bag
clamp on rearview mirror

Licensing and Insurance Requirements

You are legally required to advise your State licensing authority of any medical condition or disability that may impact on your driving. If not, you risk fines or legal action and your car insurance can be affected. You may need to provide medical reports or undergo driving tests. Modifications to your vehicle must be in line with the Australian safety and design rules. Fitting of wheelchair occupant restraints, child restraints and vehicle hoist ramps must meet relevant Australian Standards. Modifications should be done by suitably qualified vehicle modifiers. You will also need to inform your car insurer of any vehicle modifications. Your policy may become void if you do not do so. Contact the vehicle licensing / registration authority in your State for more information.

Manufacturer/Country

Taiwan

Maintenance

Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

Models / Specifications