General Details

Extra product information

- The rails are made from stainless steel or mild steel that is white powder coated.
- The rails can be powder coated - people with a visual impairment may find the contrast of coloured rail easier to see.
- Can be resprayed and recoated if required at additional cost.
- All the rails are suitable for wheelchair front transfers. The 3 in 1 model folds down at the side to allow side transfers.
- Fit most standard toilet bowls.
- Accommodate K-Care and Savannah raised toilet seats
- May be useful for people with special hygiene needs eg urethea bags or self catheterising.

Installation

The toilet grab rail is screwed together with the toilet seat at the rear of the toilet and held firmly to the outside of the bowl with additional stainless steel bolts.

The 3 in 1 model is supplied with a Hex key for adjusting the clamp that secures the side rails in position.

Options

- Lap Seat Belt Restrainer with hook and loop tape or buckle closure (may be suitable for people with dementia or physical disabilities).

- Step-on Footstool: A child's step which attaches firmly to the Throne Support Rail and flips up out of the way when not needed. This can be used for climbing up onto the seat, and as a footrest when seated. A gas-lift mechanism keeps the step in the upright position until needed.

- Emergency alarm buttons can be installed into the standard and splayed models by threading the cord internally through the tubing, leaving the button on the end of the rail. They can be attached to other models by clamping them onto the most suitable part of the rail.

Manufacturer/Country

Throne Accessories

Warranty

2 Years

Websites

• Throne Grab Rail - https://www.mobilityhq.com.au/grab-rails-throne~9551
• Throne Grab Rail - https://www.aidacare.com.au/products/bathroom-toilet/toileting-aids/over-toilet-aids/throne-grab-rail/

Maintenance

Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

Models / Specifications