General Details

Extra product information

Standard Features:
. seat, backrest, folding frame, four locking wheels, footrest, back and seat upholstery and a splash guard.
. any of the standard components and additional accessories can be obtained separately.

Backrest:
. removable waterproof upholstery
. the upholstery attaches to the backrest via five protrusions which slot into curcular holes on the backrest.
. angle of the backrest is adjusted using the wing nut shaped handles at each side panel of the backrest.
. includes slots for the attachment of additional postural supports.

Seat:
. covered with waterproof padded upholstery.
. splashguard is removable (slides off and on the front of the seat).
. slot attachments at the rear of the seat for placement of postural supports.
. seat and backrest are able to tilt as one unit (tilt in space). The adjustment is via two wing nut shaped handles each side of the mobile frame below the backrest adjustment handle.

Frame:
. height adjustable
. four locking castors

Footrests:
. adjustable in height and angle.
. can be tilted backwards during transfers

Options:
. head rest
. lateral side supports that are width adjustable. A swing away version is available.
. a swing away armrest/tray that mounts into fittings both sides of the seat.
. commode pan with holder.
. suction cups for the base of the seat when used in the bath.
. hardware to mount the seat onto a toilet.
. lap belt, harness and vest postural supports.
. sides with upholstery.
. footplate straps.

Method of Use
To remove the seat:
1. Remove the commode pan (if in place) and then the screws on each side of the front of the seat.
2. The seat can then be lifted from the frame.
3. The seat may only be used on the toilet with the mounting hardware and in the bath with suction cups in place under the seat.

To fold:
1. Remove the commode pan if in place.
2. Tip the footplates back into a vertical position.
3. Push the complete footrest unit up under the seat until it clicks in place by pushing down on the green knobs each side of the top of the footrest hangers.
4. Remove the tray if in place and position the seat backrest in a forward position.
5. Remove the screws at both sides of the seat front and remove the seat from the frame.
6. Loosen the handles that alter the seat tilt, pull downwards on the two green knobs on the frame and tilt the seat down so it is parallel with the frame.
7. Remove the two screws on the front of the frame with an allen key, (near the castors) and the frame will fold.

Manufacturer/Country

R82 / Denmark

Warranty

Contact Supplier for Details

Websites

• R82 Flamingo - http://www.r82.com/products/toilet-bath-/flamingo/c-23/c-74/p-197/?sku=48564

Maintenance

Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

Models / Specifications

Features

Contact listed suppliers to confirm features, options and models available.

Frame

• Commode frame:
  • aluminium
  • height adjustable
  • mobile
  • steel
• Commode frame options:
  • tilt in space (manually)

Seat

• Commode seat:
  • padded
  • pommel

Commode Pan

• Commode pan:
  • removable from the rear

Armrests

• Commode armrest options:
  • lift up

Backrest

• Commode backrest:
  • angle adjustable
  • padded
• Commode backrest options:
  • lateral supports

Headrest

• Commode headrest:
  • angle adjustable
  • contoured
  • height adjustable
  • optional
  • removable
  • vinyl

Legrests

• Commode legrests:
  • length adjustable

Footrest

• Commode footplates:
  • angle adjustable
  • lift up
  • two piece

Wheels

• Commode castors:
  • brake locking

Optional Accessories

• Commode accessories:
  • positioning belt(s)
  • splash guard
  • tray