Person to person emergency call system with an alarm incorporating a tilt switch and delayed timer mechanism. There are two models available with varying receiver ranges and time delays.
Caution: Emergency Call Systems - NBN
The planned National Broadband Network (NBN), if built as proposed, will replace the existing fixed-line copper telecommunications network. Telephone based emergency call systems supplied by companies who are members of Personal Emergency Response Services Australia (PERSA) are expected to work correctly when connected to the NBN. Please be aware that battery back-up time on the NBN will only work for a few hours during a power failure. Please ensure that your NBN customer equipment is set-up correctly to work with your emergency call system and that the Retail Service Provider (RSP) that you have selected to provide your broadband can support that set-up. If the NBN is rolling-out in your area, call your emergency call system supplier before you sign any contract for the NBN service so they can assist you to select an RSP that is likely to support the continued operation of your emergency call system over the NBN.
Caution: Emergency Call Systems - '000'
It is important to be aware that 000 calls from automated devices (such as emergency call systems) cannot be guaranteed a response from the emergency services if they are unable to validate the condition, address and required response. It is therefore not recommended to program 000 into a non-monitored emergency call system (or autodialling system).
DCT Associates / Australia
See supplier for details
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Models / Specifications
Model Long Range Unit: Fixed time delay of 24 seconds
Model Short Range Unit: 20 to 30 meter range. A 20 second delay is recommended.
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
|Supplier Code||Price & Price Notes||Hire?||Repair?||Availability|
|0.0 - 0.0||unknown||unknown|
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.