1300 885 886 Independent Living Centres Advisory Service

Cama Handi-Lift Wheelchair Stairlift (PR04407)

2727 pr04407 cama%20wheelchair%20stairlift

Cama Handi-Lift Wheelchair Stairlift

https://ilcaustralia.org.au/products/4407

A range of electrically powered stairlifts with a wheelchair platform designed for either indoor or outdoor use. Also suitable for straight or curved stairs and stairs with landings. Designed for commercial / healthcare facility use. Lifts are custom built with regard to the width, length and direction of the staircase. Two models are available

General Details

Extra product information

. folded platform
. aluminium wall mounted rail system
. safety arms and flaps which lift up when platform is in motion

Safety features
. overspeed govenor and brake
. pressure sensitive surfaces which stop the lift when it runs into an obstacle
. limit switch
. thermal overload relay
. thermal release mechanism

Options

. folding seat

Installation

Minimum width of stairs required for installation of the stairlift-
1150mm in domestic situation
1400 in commercial situation if another stairway with one metre clearance is nearby for fire access, otherwise stair needs to be 2.1 metres wide

In the ACT, the Scaffolding and Lifts Regulation 1950 requires the installer of the lift (the Lift Company) to submit a 'Notice of Intention to Erect or Alter a Lift'. This applies to all lifts including service lifts and disabled access lifts. All lifts that are installed in the ACT need to comply with the current Lift Code of Australia.

Once the lift is erected, the lift company will contact Worksafe to arrange a "pre-commissioning inspection and test " on the lift (both new and upgraded). Worksafe charges an initiation fee of $44 plus $29 per hour for this service. (This fee is revised regularly). There is no requirement for the owner to arrange an annual inspection. For more information, contact ACT Worksafe on 6205 0200.

Information correct March 2011

Manufacturer/Country
Denmark
Websites
- http://www.handicare.com/media/96206/Installation-manual_Handi_lift-7-Eng-Ver-1_0-Complete.pdf

Models / Specifications

Model Handi-Lift 7: For straight staircases
  • Width Overall 1050 mm
  • Width Overall 350 mm (Folded)
  • Load Capacity (supplier stated) 225 kg
  • Height 45 mm (Of platform)
Model Handi-Lift 6: For curved staircases
  • Width Overall 1100 mm
  • Width Overall 350 mm (Folded)
  • Load Capacity (supplier stated) 225 kg
  • Height 45 mm (Of platform)

Suppliers (0)

    Agents (0)

      Importers (0)

        Manufacturers (0)

          Maintenance

          Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

          Standards

          Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation

          Disclaimer

          Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.