General Details

Extra product information

The carrier consists of a rectangular base plate bolted to the towbar, a framework slides into this, secured by ring pins, which supports the wheelchair.

The framework is made from zinc plated tubular steel and can be removed from the towbar base plate when not in use.

Provision has been made on the rear of the carrier for a number plate.

METHOD OF USE
1. Remove pin securing ramp to carrier.
2. Place ramp so that the lip of the ramp hooks onto the side end of the metal frame.
3. Push the folded wheelchair up the ramp and secure to tie down points by straps.
4. Refasten ramp to original position located at the rear of the carrier.

Options

. tie down straps
. waterproof cover.
. Customising to suit wheelchairs with either 610mm or 300mm rear wheels is available.

Licensing and Insurance Requirements

You are legally required to advise your State licensing authority of any medical condition or disability that may impact on your driving. If not, you risk fines or legal action and your car insurance can be affected. You may need to provide medical reports or undergo driving tests. Modifications to your vehicle must be in line with the Australian safety and design rules. Fitting of wheelchair occupant restraints, child restraints and vehicle hoist ramps must meet relevant Australian Standards. Modifications should be done by suitably qualified vehicle modifiers. You will also need to inform your car insurer of any vehicle modifications. Your policy may become void if you do not do so. Contact the vehicle licensing / registration authority in your State for more information.

Manufacturer/Country

Unknown

Maintenance

Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

Models / Specifications